Hướng dẫn replacing string in php

(PHP 4, PHP 5, PHP 7, PHP 8)

Show

substr_replaceReplace text within a portion of a string

Description

substr_replace(
    array|string $string,
    array|string $replace,
    array|int $offset,
    array|int|null $length = null
): string|array

Parameters

string

The input string.

An array of strings can be provided, in which case the replacements will occur on each string in turn. In this case, the replace, offset and length parameters may be provided either as scalar values to be applied to each input string in turn, or as arrays, in which case the corresponding array element will be used for each input string.

replace

The replacement string.

offset

If offset is non-negative, the replacing will begin at the offset'th offset into string.

If offset is negative, the replacing will begin at the offset'th character from the end of string.

length

If given and is positive, it represents the length of the portion of string which is to be replaced. If it is negative, it represents the number of characters from the end of string at which to stop replacing. If it is not given, then it will default to strlen( string ); i.e. end the replacing at the end of string. Of course, if length is zero then this function will have the effect of inserting replace into string at the given offset offset.

Return Values

The result string is returned. If string is an array then array is returned.

Changelog

VersionDescription
8.0.0 length is nullable now.

Examples

Example #1 Simple substr_replace() examples

$var 'ABCDEFGH:/MNRPQR/';
echo 
"Original: $var\n";/* These two examples replace all of $var with 'bob'. */
echo substr_replace($var'bob'0) . "\n";
echo 
substr_replace($var'bob'0strlen($var)) . "\n";/* Insert 'bob' right at the beginning of $var. */
echo substr_replace($var'bob'00) . "\n";/* These next two replace 'MNRPQR' in $var with 'bob'. */
echo substr_replace($var'bob'10, -1) . "\n";
echo 
substr_replace($var'bob', -7, -1) . "\n";/* Delete 'MNRPQR' from $var. */
echo substr_replace($var''10, -1) . "\n";
?>

Example #2 Using substr_replace() to replace multiple strings at once

$input = array('A: XXX''B: XXX''C: XXX');// A simple case: replace XXX in each string with YYY.
echo implode('; 'substr_replace($input'YYY'33))."\n";// A more complicated case where each replacement is different.
$replace = array('AAA''BBB''CCC');
echo 
implode('; 'substr_replace($input$replace33))."\n";// Replace a different number of characters each time.
$length = array(123);
echo 
implode('; 'substr_replace($input$replace3$length))."\n";
?>

The above example will output:

A: YYY; B: YYY; C: YYY
A: AAA; B: BBB; C: CCC
A: AAAXX; B: BBBX; C: CCC

Notes

Note: This function is binary-safe.

See Also

  • str_replace() - Replace all occurrences of the search string with the replacement string
  • substr() - Return part of a string
  • String access and modification by character

elloromtz at gmail dot com

12 years ago

It's worth noting that when start and length are both negative -and- the length is less than or equal to start, the length will have the effect of being set as 0.

substr_replace('eggs','x',-1,-1); //eggxs
substr_replace('eggs','x',-1,-2); //eggxs
substr_replace('eggs','x',-1,-2); //eggxs
?>

Same as:
substr_replace('eggs','x',-1,0); //eggxs
?>

substr_replace('huevos','x',-2,-2); //huevxos
substr_replace('huevos','x',-2,-3); //huevxos
substr_replace('huevos','x',-2,-3); //huevxos
?>

Same as:
substr_replace('huevos','x',-2,0); //huevxos
?>

Another note, if length is negative and start offsets the same position as length, length (yet again) will have the effect as being set as 0. (Of course, as mentioned in the manual, when length is negative it actually represents the position before it)

substr_replace('abcd', 'x', 0, -4); //xabcd
?>

Same as:
substr_replace('abcd','x',0,0); //xabcd
?>

substr_replace('abcd', 'x', 1, -3); //axbcd
?>

Same as:
substr_replace('abcd', 'x', 1, 0); //axbcd
?>

billg AT microsoft.com

13 years ago

Forget all of the mb_substr_replace() implementations mentioned in this page, they're all buggy.

Here is a version that mimics the behavior of substr_replace() exactly:

if (function_exists('mb_substr_replace') === false)
{
    function
mb_substr_replace($string, $replacement, $start, $length = null, $encoding = null)
    {
        if (
extension_loaded('mbstring') === true)
        {
           
$string_length = (is_null($encoding) === true) ? mb_strlen($string) : mb_strlen($string, $encoding);

                        if (

$start < 0)
            {
               
$start = max(0, $string_length + $start);
            }

                        else if (

$start > $string_length)
            {
               
$start = $string_length;
            }

                        if (

$length < 0)
            {
               
$length = max(0, $string_length - $start + $length);
            }

                        else if ((

is_null($length) === true) || ($length > $string_length))
            {
               
$length = $string_length;
            }

                        if ((

$start + $length) > $string_length)
            {
               
$length = $string_length - $start;
            }

                        if (

is_null($encoding) === true)
            {
                return
mb_substr($string, 0, $start) . $replacement . mb_substr($string, $start + $length, $string_length - $start - $length);
            }

                        return

mb_substr($string, 0, $start, $encoding) . $replacement . mb_substr($string, $start + $length, $string_length - $start - $length, $encoding);
        }

                return (

is_null($length) === true) ? substr_replace($string, $replacement, $start) : substr_replace($string, $replacement, $start, $length);
    }
}
?>

eblejr AT phrebh DOT com

14 years ago

PHP version of Java's removeCharAt() function:

function removeCharAt($str, $int){
  return
substr_replace($str,"",$int,1);
}
?>

juichenieder-phnet at yahoo dot co dot uk

13 years ago

I've just taken a look at the post by ntoniazzi and I have a very small correction to make.

In the second if statement, it should be a triple equals, so:

if ($length === null) ?>

It requires the triple equals, for the case of pure insertion, where $length = 0, the double equals, will catch this, causing the string to be cut short.  I hope this helps someone.

ivijan dot stefan at gmail dot com

8 years ago

I have a little function that works like substr_replace ()  what I use for some purpose. Maybe someone needs it.

function putinplace($string=NULL, $put=NULL, $position=false)
{
   
$d1=$d2=$i=false;
   
$d=array(strlen($string), strlen($put));
    if(
$position > $d[0]) $position=$d[0];
    for(
$i=$d[0]; $i >= $position; $i--) $string[$i+$d[1]]=$string[$i];
    for(
$i=0; $i<$d[1]; $i++) $string[$position+$i]=$put[$i];
    return
$string;
}
// Explanation
$string='My dog dont love postman'; // string
$put="'"; // put ' on position
$position=10; // number of characters (position)
print_r( putinplace($string, $put, $position) );
?>

RESULT: My dog don't love postman

This is a small powerful function that performs its job flawlessly.

danieldoorduin at hotmail dot com

17 years ago

Using substr_replace() can be avoided by using substr() instead:

$string = substr($string, 0, $position_needle).$replace.substr($string, $position_needle+$length_needle);
?>

This can be useful when you need to replace parts of multibyte strings like strings encoded with utf-8. There isn't a multibute variant for substr_replace(), but for php substr() there is mb_substr(). For more information on multibyte strings see http://nl3.php.net/manual/en/ref.mbstring.php

William Barry

14 years ago

I recently ran across a situation where I need to strip a heavily nested html list such that only the top level was preserved.  I started with a regular expression solution, but found that I kept matching the wrong closing ul with an outer opening ul.

This was my alternative solution, and it seems to work well:

function stripNestedLists($str)
{
   
$str2 = $str;
   
$lastStr = $str2;

        do
    {

// Find the first closing ul
       
$cul = strpos($str2, '');
       
$ul = 0;
       
$lastUL = 0;
        do
        {
           
// Find the next opening ul
           
$lastUL = $ul;
           
$ul = strpos($str2, ', $ul+1);
        }
        while (
$ul !== false && $ul < $cul);$lastStr = $str2;
       
$str2 = substr_replace($str2, '', $lastUL, $cul-$lastUL+5);
       
$str2 = trim($str2);
    }
    while (
strlen($str2) > 0);

        return

$lastStr;
}
?>

Hope this helps someone.

kalim dot fleet at gmail dot com

12 years ago

This will truncate a longer string to a smaller string of specified length while replacing the middle portion with a separator exactly in the middle.

$longString

= 'abcdefghijklmnopqrstuvwxyz0123456789z.jpg';
$separator = '/.../';
$separatorlength = strlen($separator) ;
$maxlength = 25 - $separatorlength;
$start = $maxlength / 2 ;
$trunc strlen($longString) - $maxlength;

echo

substr_replace($longString, $separator, $start, $trunc);//prints "abcdefghij/.../56789z.jpg"?>

klaas at group94 dot com

20 years ago

THE DOT DOT DOT ISSUE

PROBLEM:
You want to abbreviate a string.
E.g. You want "BritneySpears" to show as "BritneySpe...", being only the ten first characters followed by "..."

SOLUTION:
$oRIGINAL = "BritneySpears";
$sHORTER = substr_replace($oRIGINAL, '...', 10);
echo ($sHORTER);
?>

This will result in BritneySpe...

mrbrown8 at juno dot com

21 years ago

Just to add to the examples, if replacement is longer than length, only the length number of chars are removed from string and all of replacement is put in its place, and therefor strlen($string) is inreased.

$var = 'ABCDEFGH:/MNRPQR/';
/*  Should return ABCDEFGH:/testingRPQR/   */
echo substr_replace ($var, 'testing', 10, 2);

Hayley Watson

5 years ago

See array_splice if you want to do this sort of thing to an array.

alishahnovin at hotmail dot com

15 years ago

I like the truncate function below...however, I found a few issues. Particularly if you have content that may have any kind of punctuation in it (?, !, ?!?, --, ..., .., ;, etc.)

The older function would end up looking like "blah blah?..." or "blah blah,..." which doesn't look so nice to me...

Here's my fix. It removes all trailing punctuation (that you include in the $punctuation string below) and then adds an ellipse. So even if it has an ellipse with 3 dots, 2 dots, 4 dots, it'll be removed, then re-added.

function truncate($text,$numb,$etc = "...") {
$text = html_entity_decode($text, ENT_QUOTES);
if (
strlen($text) > $numb) {
$text = substr($text, 0, $numb);
$text = substr($text,0,strrpos($text," "));$punctuation = ".!?:;,-"; //punctuation you want removed$text = (strspn(strrev($text),  $punctuation)!=0)
        ?
       
substr($text, 0, -strspn(strrev($text),  $punctuation))
        :
$text;$text = $text.$etc;
}
$text = htmlentities($text, ENT_QUOTES);
return
$text;
}
?>

I also needed a sort of "middle" truncate. The above function truncates around the end, but if you want to truncate around the middle (ie "Hello this is a long string." --> "Hello this ... long string.") you can use this (requires the truncate function):

function mtruncate($text, $numb, $etc = " ... ") {
   
$first_part = truncate(truncate($text, strlen($text)/2, ""), $numb/2, "");
   
$second_part = truncate(strrev(truncate(strrev($text), strlen($text)/2, "")), $numb/2, "");
    return
$first_part.$etc.$second_part;
}
?>

hermes at andycostell dot com

17 years ago

I suggest changing the function suggested by Guru Evi slightly. I found that it doesn't work as written here.

Original:
function add_3dots($string,$repl,$start,$limit) {
   if(strlen($string) > $limit) {
       return substr_replace(strip_tags($string),$repl,$start,$limit);
   } else {
       return $string;
   };
};

I suggest:
function add_3dots($string,$repl,$limit) {
       if(strlen($string) > $limit) {
           return substr_replace(strip_tags($string),$repl,$limit-strlen($repl));
       } else {
           return $string;
       }
    }

Usage:

$max_length=10;//the max number of characters you want to display
$too_long_string="BLAH BLAH BLAH BLAH BLAH etc.";//the string you want to shorten (if it's longer than the $limit)
$shorter_string=add_3_dots($too_long_string,"...",$max_length);

den dot gierling at web dot de

12 years ago

My problem was that substr_replace() always added $replacement, so i wrote my own function.
This function only adds $replacement, if substr() took action.
The parameter $length is optional - like substr()'s.
Or I was too stupid using $start and $length...

function substr_replace_provided($string,$replacement,$start,$length=NULL)
{
   
$tmp=substr($string,$start,$length);
    if(
$string!==$tmp) {
       
$string = $tmp.$replacement;
    }
    return
$string;
}
?>

Guru Evi

17 years ago

If your string is not long enough to meet what you specify in start and length then the replacement string is added towards the end of the string.

I wanted to replace the end of the string with ... if the string was too long to display (for instance article preview on a website). The problem was that my string was sometimes not that long and it still added the replacement string. So I wrote a function to replace substr_replace in my website:

function add_3dots($string,$repl,$start,$limit) {
    if(strlen($string) > $limit) {
        return substr_replace(strip_tags($string),$repl,$start,$limit);
    } else {
        return $string;
    };
};

I use strip_tags to strip out the HTML otherwise you might get a screwed up HTML (when a tags open in the string, but because you cut-off it doesn't)

shaman_master at list dot ru

2 years ago

Add prefix to strings:
substr_replace($strings, '_prefix', 0, 0);
?>
Add suffix/postfix to strings:
substr_replace($strings, '_suffix', array_map('strlen', $strings), 0);
?>

bkline at rksystems dot com

3 years ago

I imagine the description of the parameters really means "number of bytes" where it says "number of characters" (confirmed by testing).

meg dot phillips91 at gmail dot com

2 years ago

This may be obvious to others, but I just spent hours and my feeble brain only caught up to it after a long break.

If you are looping through a string which has multiple substrings that need to be replaced, you have to add an offset factor to each original offset before you replaced any strings. Here is a real world example:

From draft.js we get paragraphs with multiple links designated only with offset, anchor text length, url, target. So each anchor text must be wrapped in the anchortext to save proper content in the database.

Here is the implementation of offset factor:

$offset_factor = 0;

foreach($content->links->links as $index=>$link){
            $replacement = ''.$link->anchorText.'';
            $new_offset = $link->offset + $offset_factor;
            $newtext = \substr_replace($content->text, $replacement, $new_offset, $link->length);

            //now we reset the original paragraph text with newtext
            $content->text = $newtext;

                       //calculate the new offset by calculating the difference in replacement length and original length and add that to the offset_factor
            $additional_characters = strlen($replacement) - $link->length;
            $offset_factor =  $offset_factor + $additional_characters;
        }

I hope this helps a noobie :) If there is another easier way, I would love to hear about it.

yeyijelud at amadamus dot com

3 years ago

First Example can be simplified =>

$input = array('A: XXX', 'B: XXX', 'C: XXX');

substr_replace($input, 'YYY', -3);

output: Array ( [0] => A: YYY [1] => B: YYY [2] => C: YYY )

NiX0n at fragfest dot cx

13 years ago

The preemptive test to see if $string is "too long" shouldn't add strlen($replacement) to $max.  $max should represent the absolute maximum length of string returned.  The size of the $replacement is irrelevant in that determination.

The rest of the function (unchanged below) operates as defined above.  Meaning, the size of the $replacement is subtracted from the $max, so that the returned string is exactly the length of $max.

function truncate($string, $max = 20, $replacement = '')
{
    if (
strlen($string) <= $max)
    {
        return
$string;
    }
   
$leave = $max - strlen ($replacement);
    return
substr_replace($string, $replacement, $leave);
}
?>

spcl dot delivery at gmail dot com

14 years ago

the version of my predecessor will add $rep even if the string is shorter than max. fixed version:

function truncate($string, $max = 20, $rep = '')
{
    if (
strlen($string) <= ($max + strlen($rep)))
    {
        return
$string;
    }
   
$leave = $max - strlen ($rep);
    return
substr_replace($string, $rep, $leave);
}
?>

To preserve the filename extension you can call it like this:

truncate([filename], 30, '...' . end(explode('.', [filename])))

jaimthorn at yahoo dot com

14 years ago

I recently needed a routine that would remove the characters in one string from another, like the regex

   $result = preg_replace("/[$chars]/", "", $string);
?>

and I needed it to be fast, and accept pretty much all input.  The regex above won't work when strlen($chars) == 0.  I came up with this, admittedly pretty horrible-looking code, that is quite fast:

function RemoveChars($string, $chars)
{
    return isset(
$chars{0}) ? str_replace($chars{0}, "", strtr($string, $chars, str_pad($chars{0}, strlen($chars), $chars{0}))) : $string;
}
?>

According to my own measurements, the regex in ONLY faster for when strlen($chars) == 1; for longer strings, my routine is faster.  What does it do?  Let's say you want to remove the period, the comma and the exclamation mark from a string, like so:
$result = RemoveChars("Isn't this, like, totally neat..!?", ".?!");
The str_pad function creates a string equal in length to the string that contains the character to be removed, but consisting only of the first character of that string:
The input is ".,!"
The output is "..."
The strtr function translates all characters in the string-to-be-processed ("Isn't this...") that also occur in the input (".,!") to the characters in the same position in the output ("...").  In other words:
Isn't this, like, totally neat..!?
becomes
Isn't this. like. totally neat....
Finally, the first character from the input (".,!") which happens to be, again, the period, is removed from that string by the str_replace call:
Isn't this like totally neat?
The function needs to check is $chars has at least one character, or else the str_pad function will fail.  If it's empty, then the unprocessed string is returned.

chuayw2000 at hotmail dot com

16 years ago

I don't know if this function is multibyte safe but I've written a function that will do the same in multibyte mode.

//Check to see if it exists in case PHP has this function later
if (!function_exists("mb_substr_replace")){
  
//Same parameters as substr_replace with the extra encoding parameter.
   
function mb_substr_replace($string,$replacement,$start,$length=null,$encoding = null){
        if (
$encoding == null){
            if (
$length == null){
                return
mb_substr($string,0,$start).$replacement;
            }
            else{
                return
mb_substr($string,0,$start).$replacement.mb_substr($string,$start + $length);
            }
        }
        else{
            if (
$length == null){
                return
mb_substr($string,0,$start,$encoding).$replacement;
            }
            else{
                return
mb_substr($string,0,$start,$encoding). $replacement. mb_substr($string,$start + $length,mb_strlen($string,$encoding),$encoding);
            }
        }
    }
}
?>

Thijs Wijnmaalen (thijs[at]nllinux.nl)

18 years ago

I wrote a function that you can use for example in combination with a search script to cut off the articles that are too long.

function substr_index($text, $maxChars = 20, $splitter
= '...') {$theReturn = $text;
$lastSpace = false;

if (

strlen($text) > $maxChars) {
$theReturn = substr($text, 0, $maxChars - 1);

if (

in_array(substr($text, $maxChars - 1, 1),
array(
' ', '.', '!', '?'))) {
$theReturn .= substr($text, $maxChars, 1);
} else {
$theReturn = substr($theReturn, 0, $maxChars -
strlen($splitter));
$lastSpace = strrpos($theReturn, ' ');

if (

$lastSpace !== false) {
$theReturn = substr($theReturn, 0, $lastSpace);
}

if (

in_array(substr($theReturn, -1, 1), array(','))) {
$theReturn = substr($theReturn, 0, -1);
}
$theReturn .= $splitter;
}
}
return
$theReturn;
}
?>

david at ethinkn dot com

19 years ago

Here is a simple function to shorten a string and add an ellipsis

/**
* truncate() Simple function to shorten a string and add an ellipsis
*
* @param string $string Origonal string
* @param integer $max Maximum length
* @param string $rep Replace with... (Default = '' - No elipsis -)
* @return string
* @author David Duong
**/
function truncate ($string, $max = 50, $rep = '') {
   
$leave = $max - strlen ($rep);
    return
substr_replace($string, $rep, $leave);
}

echo

truncate ('akfhslakdhglksjdgh', 10, '...');
// Returns akfhsla... (10 chrs)?>

nospam at nospam dot com

6 years ago

// shortens a long string to a max length while inserting a string into the exact middle
function strShorten($str, $maxlen = 10, $insert = '/.../') {
  if (
$str && !is_array($str)) { // valid string
   
if ($maxlen && is_numeric($maxlen) && $maxlen < strlen($str)) { // string needs shortening
     
if ($insert && ($ilen = strlen($insert))) { // insert string and length
       
if ($ilen >= $maxlen) { // insert string too long so use default insert
         
$insert = '**'; // short default so works even when a very small $maxlen
         
$ilen = 2;
        }
      }
     
$chars = $maxlen - $ilen; // number of $str chars to keep
     
$start = ceil($chars/2); // position to start cutting
     
$end = floor($chars/2); // position from end to stop cutting
     
return substr_replace($str, $insert, $start, -$end); // first.insert.last
   
} else { // string already short enough
     
return $str; // return original string
   
}
  }
}

echo

strShorten('123456789', 6, ''); // outputs 123789
echo strShorten('123456789', 6, '-'); // outputs 123-89
echo strShorten('123456789', 6, 'longstring'); // outputs 12**89
echo strShorten('abcdefghijklmnopqrstuvwxyz', 10, '..'); // outputs abcd..wxyz
echo strShorten('abcdefghijklmnopqrstuvwxyz'); // outputs abc/.../yz?>

dmron

18 years ago

Regarding "...", even the short functions are too long and complicated, and there's no need to use substr_replace. substr() works better and is  way faster prior to 4.3.5 as the below poster stated.

function shorten( $str, $num = 100 ) {
  if( strlen( $str ) > $num ) $str = substr( $str, 0, $num ) . "...";
  return $str;
}

Anonymous

21 years ago

If you would like to remove characters from the start or end of a string, try the substr() function.

For example, to remove the last three characters from a string:
$string = "To be or not to be.";
$string = substr ($string, 0, -3);

blessador at gmail dot com

9 years ago

$price = "12000";
$price = substr_replace ($price, ',', -3, 0)";
?>

ensure to remove the double quot  "

at the end of substr_replace ($price, ',', -3, 0)" in the above  code to avoid error.

tony at outshine dot com

18 years ago

The comment by geniusdex is a good one.  Short, simple functions are the best.  But if the string is not longer than the limit set, NOTHING is returned.  Here is the function re-done to always return a string:

function dot($str, $len, $dots = "...") {
    if (
strlen($str) > $len) {
       
$dotlen = strlen($dots);
       
$str = substr_replace($str, $dots, $len - $dotlen);
    }
    return
$str;
}
?>

geniusdex ( at ) brz ( dot ) nu

18 years ago

This is my version of making dotted strings:

function dot($str, $len, $dots = "...") {
    if (
strlen($str) > $len) {
       
$dotlen = strlen($dots);
       
substr_replace($str, $dots, $len - $dotlen);
    }
}
?>

ntoniazzi at sqli dot com

14 years ago

Almost... In the previous note, change this :
    function mb_substr_replace($string, $replacement, $start, $length=null, $encoding=null) {
        if (
$encoding == null) $encoding = mb_internal_encoding();
        if(
$start < 0) $start = mb_strlen($string) + $start;
    [...]
?>

thomasNOSPAM at sportentranceNOSPAM dot com

19 years ago

To abbreviate links into '...' if they outreach a certain amount of space; use the preg_replace function instead.

For instance you grabbed the headlines of a news site for use on your own page and the lines are to long:

asuming the raw material is stored in $unedited;

$edited = preg_replace("/(>)([[:print:]]{52,})(<)/e", "'\\1'.substr_replace('\\2 ', '...', '48').'\\3'", $unedited);
echo $edited;

This will shorten strings longer than 52 characters into 51 characters, with the last being three dots...

olav at schettler dot net

6 years ago

Please note that the function array_slice(), which has a similar functionality but for arrays rather than for strings, has its parameters in a different order.

admiral at nuclearpixel dot com

12 years ago

Hey everyone, I was noticing that there are a lot of ways below that people are using to write their own string truncation functions, but it kinda seemed like a lot of them went a bit too far out to make any sense to a n00b. Not that I am one anymore, but I though I'd add a note on this topic myself, in hopes that it might help others understand things a little better.

Here's a concept that some people don't know about, or remember to use often enough; You can actually pull individual characters out of a string by referencing that string as though it were an array. Example: If I have the string $s = 'cat', I can use $s[0] to actually get out only the first character of that string, 'c'. I use that same principle below, but I just use a loop to iterate through a string and add the characters to the output variable one by one until the $lenth param has been reached, or until the end of the string.

I hope this can help someone out!

-Admiral Potato

function admiralsTruncate($string, $length){
   
settype($string, 'string');
   
settype($length, 'integer');
    for(
$a = 0; $a < $length AND $a < strlen($string); $a++){
       
$output .= $string[$a];
    }
    return(
$output);
}
$my_string = 'cfcd208495d565ef66e7dff9f98764da';

echo

admiralsTruncate($my_string, 6);    // outputs: cfcd20echo '
'
;

echo

admiralsTruncate($my_string, 9);    // outputs: cfcd20849?>