When there is a Windows update needed to be applied, you are required to restart your PC for the update to be installed automatically during the reboot. When you restart your PC, Windows Update will start to apply the downloaded update and show you a status message that says Configuring Update For Windows 10 along with a progress percentage.
In some cases, users may find themselves get stuck at specifically 57 percent during the configuring update for Windows 10 phase. This article explains what you can do and what you should do if you meet the same issue.
- Why is Windows update stuck at 57%?
- What should I do in this case?
- Can I safely force restart during the update phase?
Why is Configuring Update For Windows 10 stuck at 57 percent?
It depends on which update you are referring to. However, in most cases, it is because Windows Update is working on something large, especially if you havent been updating your Windows for a long period of time.
According to users reports and what Ive personally experienced in recent updates, it is common on some PC that the configuring update for Windows 10 phase may stuck at 57 percent. It may stuck for a couple of hours, but it will eventually get to 100 percent. That said, it is not an error that requires action to be taken.
What should I do to finish the Windows update?
The best thing to do in this scenario is to just wait it out. If youve waited for an hour, let it sit for another couple of hours [preferably 3 hours or more] or leave it running overnight. The configuring update for Windows 10 progress will eventually get to 100% and finish the update by itself.
The fact is that the Windows update isnt stuck. It is still running even though it seems stuck at certain percentage [commonly 57%]. It just requires more time to finish.
The amount of time needed for an update to finish, according to our experience, depends on the performance of your PC, especially the hard drives speed. If your hard drive is very congested and fragmented, it may cause slow reading and writing speed on the drive, thus, requiring more time to finish a Windows update.
Stuck and slow Windows update is especially common in old laptop or desktop PC that still use HDD as the system drive. If you are using SSD as the system drive, the update should finish quicker.
Can I safely force restart or shut down my PC during Windows Update?
If you forcibly restart or shutdown your PC during the configuring update for Windows 10 phase, there is a risk that you may cause damage and corruption to the core system files that Windows was trying to update. In some rare cases, Windows might fail to load on next reboot if you interrupt the update process.
However, in most other cases, if you force restart your PC during the configuring update for Windows 10 phase, you should still be able to boot into Windows normally. Note: If you decided to force restart and interrupt the update, please do so at your own risk. We will not be held responsible for any damage or loss caused by this action.
In case of power failure or manual force restart that interrupts a Windows update event, Windows will usually attempt to restore itself to the last state the PC was in, before the start of the update. Once restarted successfully, Windows will usually re-download the update and ask for a restart for the update to be applied again.
If its not something inevitably important, try not to interrupt the Windows update process and let it finish running.