Topping D70s vs DX7 Pro

PROTECTION

Brand new

Mailing · Meetup

Sim Lim Square

Description

OFFICIAL TOPPING DEALER [>‿◠]✌ SAM AUDIO 🎵 OFFICIAL TOPPING DEALER - 1 Year Local Warranty & Aftersales Support 📦 Receive in 3 Days - Free Ninjavan Delivery - Or top up $20 for Express Delivery [2hrs] 💲 Best Price Guaranteed - We will match prices by any SG sellers [T&C applies] 💬 Responsive Reply - We strive to reply within 5 mins 👍 Promo Available - Chat with us! -- Contact Us: 📞 WhatsApp/Call us @ 83329084

📧 Email us @

🗺️ Visit Us @ Sim Lim Sqr #03-87, S188504 - Demo units available [Lvl 3 Beside Escalator] -- TOPPING DX7 PRO Balanced DAC/Amplifier ES9038Pro Features >ESS9038 Pro DAC >Bluetooth 5.0 [LDAC/AAC/APTX[HD,LL]/APX[LL,HD]] >32bit 768kHz PCM & DSD512 [Native] >Opt/Coax/AES -- Descriptions: >Versatility & Performance The Topping DX7 Pro is a model of versatility and performance. This DAC embeds a particularly complete connectivity, covering the vast majority of possible integrations in a HiFi audio system, combined with an intelligent architecture supporting high sampling rates and offering rich and accurate audio reproduction. >ES9038Pro DAC & USB XMOS XU208 Interface A major difference between the DX7s Topping and the DX7 Pro, the DAC now includes an ES9038Pro ESS chip, which is more powerful than the ES9038Q2M duo of the DX7s. This new chip offers a better signal-to-noise ratio and a lower level of distortion for an ever more accurate, rich and faithful sound reproduction. In addition, this chip supports high sampling rates. On the USB interface side, we find once again the XMOS XU208 chip, well known to audiophiles and offering an exceptionally transparent reproduction. >Bluetooth 5.0 aptX HD / LDAC Also new in this Pro version of the DX7 Topping, it is now equipped with a Bluetooth 5..0 Qualcomm CSR8675 chip. While this type of connectivity is particularly convenient by offering the possibility of remote transmission directly from a smartphone or tablet, it is also synonymous with audio quality since this chip supports the aptX, aptX LL, aptX HD and LDAC protocols. These protocols allow a faster, more stable signal transmission but also, especially in the case of LDAC, to support higher sampling rates since this protocol is able to decode PCM streams up to 24bit 96kHz [24bit 48kHz for aptX HD]. >A particularly complete connection system For its connectivity, the DX7 Pro offers a particularly complete panel. The rear panel reveals the input of USB-B [XMOS], I2S Optics, Coaxial, I2S, AES/EBU and Bluetooth antenna. On the output side, the DX7 Pro offers balanced XLR, single-ended RCA on its rear panel. The front panel of the unit features the headphone outputs amplified with 6.35mm jack, 4.4mm balanced jack and 4 pin XLR balanced jack. >Full Balanced The DX7 Pro's circuits have been designed to be full balanced. Thus, the analog section includes separate OPA 1612 operational amplifiers for each channel and the headphone amplification of each channel is assigned to an independent TPA6120A2 chip. >High fidelity balanced headphone section The DX7 Pro Topping provides optimal headphone output performance with two TPA6112A2 amplifiers. Thus, in addition to supporting up to DSD1024 and PCM 32bit 768kHz, it benefits from a particularly neat analog output stage that can drive a very large majority of audiophile headphones, on 4 pin balanced XLR output. This allows the DX7 Pro to offer a lower sound colouring and therefore a more accurate reproduction, a very low distortion and a high linearity. You gain in dynamics, detail and neutrality. Specifications: >Product type DAC + Headphone amplifier >Inputs 1x USB-B -1x Optical -1x Coaxial -1x I2S HDMI -1x AES/EBU -Bluetooth >Outputs -1x Balanced XLR -1x Single-ended stereo RCA -1x Jack 6.35mm single-ended headphone output -1x Jack 4.4mm balanced headphone output -1x XLR 4 pins balanced headphone output >DAC Chip: ES9038Pro >Supported sampling rate -USB : PCM up to 32bit 768kHz, Native DSD up to DSD512, DSD DoP up to DSD256 -I2S : PCM up to 32bit 768kHz, Native DSD up to DSD1024, DSD DoP up to DSD256 -Optical / Coaxial / AES : PCM up to 24bit 192kHz, DSD DoP up to DSD64 >Bluetooth Version: 5.0 >Supported Bluetooth protocols: LDAC, aptX, aptX LL, aptX HD, AAC, SBC >THD+N DAC [XLR] : 0.0001% -Amplifier [Jack 6.35mm headphone output] : 0.0004% -Amplifier [Balanced output] : 0.0004% >SNR -DAC [XLR] : 126dB -Amplifier [Balanced output] : 123dB >GENERAL >Housing material: Aluminium >Dimensions: 22.2 x 17.8 x 4.5cm >Package -1x DX7 PRO Black -1x Schuko power cable -1x Remote -1x USB-A to USB-B cable -1x Bluetooth antenna -1x Jack 3.5mm to Jack 6.35mm adapter

Meet-up

Sim Lim Square

Payment

Carousell Protection powered by

Meet the seller

@sam_audio

Very Responsive

Verified

Reviews for @sam_audio

5.0

Friendly and responsive, highly recommended!

[🎶SG] KZ x CRN ZEX PRO, 1DD 1EST 1BA hybrid IEM Earphone [with mic], 25Ω C-Pin, Hifi Audio

S$46

seller was very friendly and helpful and responds quickly

[🎶SG] Moondrop Aria, 32Ω 1DD 10mm LCP diaphragm, dual cavity metal shell, High Performance In-Ear Monitor IEM, HiFi Audio

S$108

Always a good experience buying from Sam audio. Friendly sales persons, and very fast shipping. Thanks!

[🎶SG] Fiio UTWS5, TWM 24bit 96kHz Hi-Res Bluetooth, Qualcomm QCC5141, Hifi Audio wireless IEM amplifier [MMCX / 2pin], with mic

S$189