❮ Php Simplexml tham chiếu
Thí dụ
Tạo một đối tượng SimpleXMlelement từ một chuỗi:
echo $xml->asXML[];
?>
Chạy ví dụ »
Định nghĩa và cách sử dụng
Hàm __construct [] tạo ra một đối tượng SimplexMlEuity mới.
Cú pháp
SimplexMlelement :: __ Xây dựng [dữ liệu, tùy chọn, data_is_url, ns, is_prefix]
Giá trị tham số
dữ liệu | Yêu cầu. Chỉ định chuỗi XML được định dạng tốt hoặc đường dẫn hoặc URL cho tài liệu XML nếu Data_is_url là đúng |
tùy chọn | Không bắt buộc. Chỉ định các tham số LibXML bổ sung. Được đặt bằng cách chỉ định tùy chọn và 1 hoặc 0 [đúng hoặc sai, ví dụ: libxml_noblanks [1]] Những giá trị khả thi:
|
data_is_url | Không bắt buộc. Đúng chỉ định rằng dữ liệu là đường dẫn/URL cho tài liệu XML thay vì dữ liệu chuỗi. Mặc định là sai |
ns | Không bắt buộc. Chỉ định tiền tố không gian tên hoặc URI |
is_prefix | Không bắt buộc. Chỉ định một giá trị boolean. Đúng nếu NS là tiền tố. Sai nếu NS là URI. Mặc định là sai |
Chi tiết kỹ thuật
Trả về một đối tượng SimplexMlEuity đại diện cho dữ liệu |
5.0+ |
Php 5.2.0: Đã thêm các tham số NS và IS_PREFIX tùy chọn.php 5.1.2: Đã thêm các tùy chọn tùy chọn và tham số data_is_url. PHP 5.1.2: Added the optional options and data_is_url parameters. |
Nhiều ví dụ hơn
Giả sử chúng tôi có tệp XML sau, "Note.xml":
& nbsp; & nbsp; & nbsp; Tove & nbsp; & nbsp; & nbsp; Jani & nbsp; & nbsp; & nbsp; Nhắc nhở & nbsp; & nbsp; & nbsp; Đừng quên tôi vào cuối tuần này!
Tove
Jani
Reminder
Don't forget me this weekend!
Thí dụ
Tạo một đối tượng SimplexMlelement từ URL:
ASXML [];?>
$xml=new SimpleXMLElement["note.xml", 0, TRUE];
echo $xml->asXML[];
?>
Chạy ví dụ »
❮ Php Simplexml tham chiếu
Hàm __construct [] tạo ra một đối tượng SimplexMlEuity mới.
Người xây dựng[mixed ...$values
= ""]: void
__construct [hỗn hợp ...$values
= ""]: VOID
PHP cho phép các nhà phát triển khai báo các phương thức xây dựng cho các lớp. Các lớp có phương thức xây dựng gọi phương thức này trên mỗi đối tượng mới được tạo, do đó, nó phù hợp với bất kỳ khởi tạo nào mà đối tượng có thể cần trước khi nó được sử dụng.: Parent constructors are not called implicitly if the child class defines a constructor. In order to run a parent constructor, a call to parent::__construct[] within the child constructor is required. If the child does not define a constructor then it may be inherited from the parent class just like a normal class method [if it was not declared as private].
Lưu ý: Các hàm tạo cha mẹ không được gọi là ngầm nếu lớp con định nghĩa một hàm tạo. Để chạy một hàm tạo cha mẹ, một cuộc gọi đến cha mẹ :: __ construct [] trong hàm tạo con là bắt buộc. Nếu trẻ không định nghĩa một hàm tạo thì nó có thể được kế thừa từ lớp cha giống như một phương thức lớp bình thường [nếu nó không được tuyên bố là riêng tư].
1
SubClass extends BaseClass {
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}class
OtherSubClass extends BaseClass {
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
27 tháng trước ¶
Domger tại Freenet Dot de ¶
classSubClass extends BaseClass {
3
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
classSubClass extends BaseClass {
4
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
classSubClass extends BaseClass {
5
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
classSubClass extends BaseClass {
6
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
SubClass extends BaseClass {
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}class
OtherSubClass extends BaseClass {
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
25 năm trước ¶
IWWP tại Outlook Dot Com ¶
classSubClass extends BaseClass {
8
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
classSubClass extends BaseClass {
9
function __construct[] {
parent::__construct[];
print "In SubClass constructor\n";
}
}
// inherits BaseClass's constructor
}// In BaseClass constructor
$obj = new BaseClass[];// In BaseClass constructor
// In SubClass constructor
$obj = new SubClass[];// In BaseClass constructor
$obj = new OtherSubClass[];
?>
2
14 năm trước ¶
prieler tại ABM Dot tại ¶
public function
6
public function
7
public function
8
public function
915 năm trước ¶
Yousef Ismaeil cliprz [at] gmail [dot] com ¶
__construct[int $x, int $y = 0] {
0
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
1
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
29 năm trước ¶
Mỗi Persson ¶
__construct[int $x, int $y = 0] {
3
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
4
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
5
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
610 năm trước ¶
Jonathon Hibbard ¶
__construct[int $x, int $y = 0] {
7
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
8
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
__construct[int $x, int $y = 0] {
9
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
E_DEPRECATED
012 năm trước ¶
lách ¶
E_DEPRECATED
1
14 năm trước ¶
lách ¶
E_DEPRECATED
2
E_DEPRECATED
3
E_DEPRECATED
4
E_DEPRECATED
5
E_DEPRECATED
6
E_DEPRECATED
7
__construct[int $x, int $y = 0] {
1
$this->x = $x;
$this->y = $y;
}
}// Pass both parameters.
$p1 = new Point[4, 5];
// Pass only the required parameter. $y will take its default value of 0.
$p2 = new Point[4];
// With named parameters [as of PHP 8.0]:
$p3 = new Point[y: 5, x: 4];
?>
E_DEPRECATED
9
2
15 năm trước ¶
Yousef Ismaeil cliprz [at] gmail [dot] com ¶
const
0
const
1
const
2
const
3
const
49 năm trước ¶
Mỗi Persson ¶
const
5
const
6
const
7
const
8
const
9