Bose Portable Home Speaker soft reset

Do you have a Bose Portable Home Speaker that needs resetting? If so, you’re in luck! We’re going to show you how to reset a Bose portable home speaker

Have you ever had a Bose Portable Home Speaker that just didn’t seem to work the way you wanted it to? Maybe the volume was turned down too low, or the sound was distorted. Or, whatever problem you are facing, in many cases just resetting your speaker resolves many issues. Here, in this article, I am going to show you how to reset a Bose portable home speaker in easy four steps.

Locate the Reset Button

The Reset button is located on the back of the speaker. To locate the reset button, first, remove the cover. Next, locate the four screws that hold the backplate in place. Remove these screws and then carefully pull off the backplate. The reset button is located on a small circuit board near the top of the backplate.

Press and hold the Reset Button for 10 Seconds

In order to reset a Bose Portable Home Speaker, after you locate the reset button, press and hold the reset button for 10 seconds. Once the button has been pressed and held for 10 seconds, release it and the speaker will reset. Depending on the model, there may be additional steps that need to be followed in order to restart the speaker.

Release the Reset Button and Re-press It Again

There are two buttons on the Bose Portable Home Speaker that need to be released before it can be powered on. The buttons are located on either side of the speaker near the power button. Once the buttons have been released, simply press the power button for three seconds to turn on the speaker.

Wait for the Speaker to Resume Functioning normally

When the speaker is not being used, it may be in a low power state and require a few minutes to “wake up” and resume normal function. Once the speaker has been turned on, it should resume normal operation without any further intervention.

If the speaker does not have a reset button, you can try using these steps:

How to Factory Reset Bose Portable Home Speaker

If you need to factory reset your BOSE Portable Home Speaker, there are a few steps that you should follow. If you are having trouble connecting your BOSE Portable Home Speaker to your smartphone or another Bluetooth-enabled device, there is a simple solution. First, try power cycling the speaker by unplugging it for a few seconds and then plugging it back in. If that does not solve the problem, you can factory reset the speaker by following these steps:

1) On the home screen of your device, tap Settings > Bluetooth.

2) Tap the name of the speaker you want to factory reset and then tap Reset.

3) Tap Erase All Content and Settings.

4) Enter your passcode if prompted and then tap OK.

5) After the reset is complete, tap OK to return to the main Bluetooth screen.

If you are still having trouble connecting the speaker, please contact customer support.

How to Reset Bose Home Speaker 500

If your Bose Home Speaker 500 is not connecting to your Bluetooth device or speaker, there are a few things you can try.

First, make sure that the Home Speaker 500 and your Bluetooth device are both turned on. If the Home Speaker 500 is connected to an external power source, make sure that it is plugged into an outlet and not simply turned on.

Next, try restarting both devices by pressing and holding down the power button for approximately five seconds. If those steps do not work, you can reset the Home Speaker 500 by pressing and holding down the reset button for approximately 10 seconds.

Afterward, you will be prompted to choose a language and password. Once finished, your Home Speaker 500 will be ready to use again.

Conclusion:

Follow the above-mentioned simple steps of soft reset or hard reset and your Bose Portable Home Speaker will be back to its original condition in no time! We hope this article was helpful to provide you with enough useful information on how to reset your Bose Portable Home Speaker. If you still have any questions, please don’t hesitate to reach out to us!