Thời gian Python để đánh dấu thời gian
Dấu thời gian UNIX là tổng số giây đã được tính kể từ kỷ nguyên. Kỷ nguyên là điểm bắt đầu của thời gian và phụ thuộc vào nền tảng. Kỷ nguyên là ngày 1 tháng 1 năm 1970, 00. 00. 00 (UTC) trên Windows và hầu hết các hệ thống Unix và giây nhuận không được tính vào thời gian tính bằng giây kể từ kỷ nguyên Show
Trong bài viết này, chúng ta sẽ xem cách chuyển đổi ngày python thành dấu thời gian UNIX Ngày giờ đến dấu thời gian UNIXỞ đây, chúng tôi chuyển đổi ngày python thành dấu thời gian UNIX bằng cách sử dụng thời gian. mktime(). Trong ví dụ này, ban đầu chúng tôi đã nhập mô-đun datetime. Sau đó, chúng tôi đã khai báo và chỉ định một ngày giờ. thời gian/ngày(2022, 6, 3, 12, 0, 50). thời gian. mktime() là hàm nghịch đảo của giờ địa phương. Thời gian. phương thức mktime() của mô-đun thời gian chấp nhận thời gian. đối tượng struct_time hoặc bộ gồm 9 phần tử và trả về giá trị float biểu thị thời gian kể từ kỷ nguyên tính bằng giây cú phápCú pháp của phương thức mktime() như sau time.mktime(t) Ở đâu, t là thời gian. đối tượng struct_time hoặc một tuple chứa 9 phần tử đáp ứng thời gian. đối tượng struct_time Phương thức timetuple() của datetime. ví dụ ngày trả về một đối tượng kiểu thời gian. struct_time. Đối tượng này được chuyển đổi thành dấu thời gian UNIX bằng cách sử dụng thời gian. phương thức mktime() Ví dụDưới đây là mã ví dụ để chuyển đổi ngày python thành dấu thời gian UNIX
đầu raĐầu ra của đoạn mã trên như sau; Given Date: 2022-06-03 12:00:50 UNIX timestamp: 1654257650.0 Ngày giờ đến Dấu thời gian UNIX trong múi giờ utcỞ đây chúng ta có thể sử dụng mô-đun datetime để chuyển đổi ngày giờ thành dấu thời gian UTC trong Python. Nếu bạn đã có đối tượng datetime trong UTC, bạn có thể timestamp() để lấy dấu thời gian UTC. Hàm này trả về thời gian kể từ epoch cho đối tượng datetime đó. Nếu bạn có đối tượng datetime trong múi giờ địa phương, trước tiên hãy thay thế thông tin múi giờ rồi tìm nạp thời gian Ví dụSau đây là mã ví dụ để chuyển đổi thời gian thành dấu thời gian UNIX
đầu raThe timestamp for the date 06-07-2022 is: 1654560000.0 Chuỗi ngày giờ thành Dấu thời gian UNIXTrong trường hợp này, chúng tôi chuyển đổi một ngày giờ được biểu thị ở định dạng chuỗi được chuyển đổi thành Dấu thời gian UNIX Mặc dù số học ngày và giờ được hỗ trợ, trọng tâm của việc triển khai là trích xuất thuộc tính hiệu quả để định dạng và thao tác đầu ra Xem thêm mô-đunCác chức năng liên quan đến lịch chung mô-đunThời gian truy cập và chuyển đổi mô-đunMúi giờ cụ thể đại diện cho cơ sở dữ liệu múi giờ IANA ngày đóng góiThư viện của bên thứ ba với múi giờ mở rộng và hỗ trợ phân tích cú pháp Đối tượng nhận thức và ngây thơCác đối tượng ngày và giờ có thể được phân loại là "nhận biết" hoặc "ngây thơ" tùy thuộc vào việc chúng có bao gồm thông tin múi giờ hay không Với kiến thức đầy đủ về các điều chỉnh thời gian chính trị và thuật toán hiện hành, chẳng hạn như múi giờ và thông tin về thời gian tiết kiệm ánh sáng ban ngày, một đối tượng nhận biết có thể định vị chính nó so với các đối tượng nhận biết khác. Một đối tượng nhận thức đại diện cho một thời điểm cụ thể không thể giải thích được. Một đối tượng ngây thơ không chứa đủ thông tin để định vị chính nó một cách rõ ràng so với các đối tượng ngày/giờ khác. Việc một đối tượng ngây thơ đại diện cho Giờ phối hợp quốc tế (UTC), giờ địa phương hay thời gian ở một số múi giờ khác hoàn toàn phụ thuộc vào chương trình, giống như việc một số cụ thể đại diện cho mét, dặm hay khối lượng là tùy thuộc vào chương trình. Các đối tượng ngây thơ dễ hiểu và dễ làm việc với cái giá phải trả là bỏ qua một số khía cạnh của thực tế Đối với các ứng dụng yêu cầu các đối tượng nhận biết và các đối tượng có thuộc tính thông tin múi giờ tùy chọn, >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "4, có thể được đặt thành một thể hiện của một lớp con của lớp trừu tượng. Các đối tượng này nắm bắt thông tin về phần bù từ thời gian UTC, tên múi giờ và liệu thời gian tiết kiệm ánh sáng ban ngày có hiệu lực hay không Chỉ có một lớp cụ thể, lớp, được cung cấp bởi mô-đun. Lớp này có thể đại diện cho các múi giờ đơn giản với độ lệch cố định từ UTC, chẳng hạn như chính UTC hoặc các múi giờ EST và EDT của Bắc Mỹ. Hỗ trợ các múi giờ ở mức độ chi tiết sâu hơn tùy thuộc vào ứng dụng. Các quy tắc điều chỉnh thời gian trên toàn thế giới mang tính chính trị hơn là hợp lý, thay đổi thường xuyên và không có tiêu chuẩn nào phù hợp cho mọi ứng dụng ngoài UTC hằng sốMô-đun xuất các hằng số sau ngày giờ. MIN NĂMSố năm nhỏ nhất được phép trong một hoặc đối tượng. là >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.05ngày giờ. TỐI ĐA NĂM Số năm lớn nhất được phép trong một hoặc đối tượng. là >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.09ngày giờ. UTC Bí danh cho múi giờ UTC đơn lẻ Mới trong phiên bản 3. 11 Các loại có sẵnlớp ngày giờ. ngàyMột ngày ngây thơ được lý tưởng hóa, giả sử rằng lịch Gregorian hiện tại luôn có hiệu lực. Thuộc tính. , , Và lớp ngày giờ. thời gianThời gian lý tưởng hóa, không phụ thuộc vào bất kỳ ngày cụ thể nào, giả sử rằng mỗi ngày có chính xác 24*60*60 giây. (Không có khái niệm “giây nhuận” ở đây. ) Thuộc tính. , , , , Và lớp ngày giờ. ngày giờMột sự kết hợp của một ngày và một thời gian. Thuộc tính. , , , , , , , Và lớp ngày giờ. đồng hồ thời gianKhoảng thời gian thể hiện sự khác biệt giữa hai , hoặc phiên bản đối với độ phân giải micro giây lớp ngày giờ. tzinfoMột lớp cơ sở trừu tượng cho các đối tượng thông tin múi giờ. Chúng được sử dụng bởi các lớp và để cung cấp khái niệm điều chỉnh thời gian có thể tùy chỉnh (ví dụ: để tính múi giờ và/hoặc thời gian tiết kiệm ánh sáng ban ngày) lớp ngày giờ. múi giờMột lớp triển khai lớp cơ sở trừu tượng dưới dạng phần bù cố định từ UTC Mới trong phiên bản 3. 2 Các đối tượng của các loại này là bất biến quan hệ phân lớp ________số 8_______ Tài sản chung, , và các loại chia sẻ các tính năng phổ biến này
Xác định xem một đối tượng là Aware hay NaiveCác đối tượng thuộc loại luôn ngây thơ Một đối tượng thuộc loại hoặc có thể nhận thức hoặc ngây thơ Một đối tượng d nhận biết nếu cả hai điều sau đây đều đúng
Mặt khác, d là ngây thơ Một đối tượng t nhận biết nếu cả hai điều sau đây giữ
Nếu không, t là ngây thơ Sự khác biệt giữa nhận thức và ngây thơ không áp dụng cho các đối tượng Các đối tượngMột đối tượng đại diện cho một khoảng thời gian, sự khác biệt giữa hai ngày hoặc thời gian lớp ngày giờ. timedelta(ngày=0, seconds=0, microseconds=0, milliseconds=0, minutes=0, hours=0, weeks=0)Tất cả các đối số là tùy chọn và mặc định là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)14. Các đối số có thể là số nguyên hoặc số float và có thể dương hoặc âm Chỉ ngày, giây và micro giây được lưu trữ nội bộ. Các đối số được chuyển đổi thành các đơn vị đó
và ngày, giây và micro giây sau đó được chuẩn hóa để biểu diễn là duy nhất, với
Ví dụ sau đây minh họa cách mọi đối số ngoài ngày, giây và micro giây được “hợp nhất” và chuẩn hóa thành ba thuộc tính kết quả đó >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10) Nếu bất kỳ đối số nào là số float và có micro giây phân số, thì micro giây phân số còn lại từ tất cả các đối số sẽ được kết hợp và tổng của chúng được làm tròn đến micro giây gần nhất bằng cách sử dụng bộ ngắt kết nối nửa vòng đến chẵn. Nếu không có đối số nào là float, quá trình chuyển đổi và chuẩn hóa là chính xác (không có thông tin nào bị mất) Nếu giá trị chuẩn hóa của ngày nằm ngoài phạm vi được chỉ định, được tăng lên Lưu ý rằng việc chuẩn hóa các giá trị âm lúc đầu có thể gây ngạc nhiên. Ví dụ >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999) Thuộc tính lớp đồng bằng thời gian. phútĐối tượng tiêu cực nhất, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)20đồng bằng thời gian. tối đa Đối tượng tích cực nhất, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)22đồng bằng thời gian. độ phân giải Sự khác biệt nhỏ nhất có thể giữa các đối tượng không bằng nhau, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)24 Lưu ý rằng, do chuẩn hóa, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)25 > >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)26. >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)27 không thể biểu diễn như một đối tượng Thuộc tính phiên bản (chỉ đọc) Thuộc tính Giá trị >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)29 Giữa -999999999 và bao gồm cả 999999999 >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)30 Bao gồm từ 0 đến 86399 >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)31 Bao gồm từ 0 đến 999999 hoạt động được hỗ trợ Hoạt động Kết quả >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)32 Tổng của t2 và t3. Sau đó t1-t2 == t3 và t1-t3 == t2 là đúng. (1) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)33 Sự khác biệt của t2 và t3. Sau đó t1 == t2 - t3 và t2 == t1 + t3 là đúng. (1)(6) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)34 Delta nhân với một số nguyên. Sau đó t1 // i == t2 là đúng, với điều kiện là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)35 Nói chung, t1 * i == t1 * (i-1) + t1 là đúng. (1) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)36 Delta nhân với một số float. Kết quả được làm tròn đến bội số gần nhất của timedelta. độ phân giải sử dụng nửa vòng đến chẵn >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)37 Chia (3) tổng thời lượng t2 cho đơn vị khoảng thời gian t3. Trả về một đối tượng >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)39 Delta chia cho float hoặc int. Kết quả được làm tròn đến bội số gần nhất của timedelta. độ phân giải sử dụng nửa vòng đến chẵn >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)40 hoặc >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)41 Sàn được tính và phần còn lại (nếu có) bị vứt đi. Trong trường hợp thứ hai, một số nguyên được trả về. (3) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)42 Phần còn lại được tính như một đối tượng. (3) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)44 Tính thương và số dư. >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)45 (3) và >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)46. q là một số nguyên và r là một đối tượng >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)48 Trả về một đối tượng có cùng giá trị. (2) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)50 tương đương với (-t1. ngày, -t1. giây, -t1. micro giây) và đến t1* -1. (1)(4) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)52 tương đương với +t khi >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)53, và với -t khi >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)54. (2) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)55 Trả về một chuỗi ở dạng >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)56, trong đó D là số âm cho số âm của >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)57. (5) >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)58 Trả về một biểu diễn chuỗi của đối tượng dưới dạng lệnh gọi hàm tạo với các giá trị thuộc tính chuẩn ghi chú
Ngoài các hoạt động được liệt kê ở trên, các đối tượng hỗ trợ một số phép cộng và phép trừ với và đối tượng (xem bên dưới) Đã thay đổi trong phiên bản 3. 2. Phép chia tầng và phép chia thực sự của một đối tượng cho một đối tượng khác hiện đã được hỗ trợ, cũng như các phép toán còn lại và hàm. Phép chia thực sự và phép nhân của một đối tượng với một đối tượng hiện được hỗ trợ. So sánh các đối tượng được hỗ trợ, với một số lưu ý Các phép so sánh >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)75 hoặc >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)76 luôn trả về a , bất kể loại đối tượng được so sánh >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False Đối với tất cả các phép so sánh khác (chẳng hạn như >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)78 và >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)79), khi một đối tượng được so sánh với một đối tượng thuộc loại khác, sẽ được nâng lên >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File " Trong ngữ cảnh Boolean, một đối tượng được coi là đúng khi và chỉ khi nó không bằng >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)83 Phương thức sơ thẩm đồng bằng thời gian. total_seconds()Trả về tổng số giây có trong khoảng thời gian. Tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)84. Đối với các đơn vị khoảng thời gian không phải là giây, hãy sử dụng biểu mẫu chia trực tiếp (e. g. >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)85) Lưu ý rằng trong khoảng thời gian rất lớn (hơn 270 năm trên hầu hết các nền tảng), phương pháp này sẽ mất độ chính xác micro giây Mới trong phiên bản 3. 2 Ví dụ về cách sử dụng.Một ví dụ bổ sung về chuẩn hóa >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.0 Ví dụ về số học >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3) Các đối tượngMột đối tượng đại diện cho một ngày (năm, tháng và ngày) trong lịch lý tưởng hóa, lịch Gregorian hiện tại được mở rộng vô thời hạn theo cả hai hướng Ngày 1 tháng 1 của năm 1 được gọi là ngày 1, ngày 2 tháng 1 của năm 1 được gọi là ngày 2, v.v. lớp ngày giờ. ngày(năm , tháng, day)Tất cả các đối số là bắt buộc. Các đối số phải là số nguyên, trong các phạm vi sau
Nếu một đối số bên ngoài các phạm vi được đưa ra, được nâng lên Các hàm tạo khác, tất cả các phương thức của lớp phương thức lớp ngày. hôm nay()Trả về ngày địa phương hiện tại Điều này tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)94phương thức lớp ngày. dấu thời gian từ(dấu thời gian) Trả về ngày địa phương tương ứng với dấu thời gian POSIX, chẳng hạn như được trả về bởi Điều này có thể tăng , nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi hàm >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 của nền tảng và trên >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 không thành công. Điều này thường bị giới hạn trong các năm từ 1970 đến 2038. Lưu ý rằng trên các hệ thống không phải POSIX bao gồm các giây nhuận trong khái niệm dấu thời gian, các giây nhuận bị bỏ qua bởi Đã thay đổi trong phiên bản 3. 3. Tăng thay vì nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi hàm C ________9____97 của nền tảng. Tăng thay vì trên >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 thất bại. phương thức lớp ngày. từ thứ tự(thứ tự) Trả về ngày tương ứng với thứ tự Gregorian proleptic, trong đó ngày 1 tháng 1 của năm 1 có thứ tự 1 được nâng lên trừ khi >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)08. Đối với bất kỳ ngày d, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)09phương thức lớp ngày. fromisoformat(date_string) Trả về một tương ứng với một chuỗi_ngày được cung cấp ở bất kỳ định dạng ISO 8601 hợp lệ nào, ngoại trừ các ngày thứ tự (e. g. >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)11) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4) Mới trong phiên bản 3. 7 Đã thay đổi trong phiên bản 3. 11. Trước đây, phương thức này chỉ hỗ trợ định dạng >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)12. phương thức lớp ngày. từ dương lịch(năm , tuần, day) Trả về một tương ứng với ngày theo lịch ISO được chỉ định theo năm, tuần và ngày. Đây là nghịch đảo của hàm Mới trong phiên bản 3. 8 Thuộc tính lớp ngày. phútNgày có thể đại diện sớm nhất, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)15ngày. tối đa Ngày đại diện mới nhất, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)16ngày. độ phân giải Sự khác biệt nhỏ nhất có thể giữa các đối tượng ngày không bằng nhau, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)17 Thuộc tính phiên bản (chỉ đọc) ngày. nămGiữa và bao gồm ngày. thángTừ 1 đến 12 bao gồm ngày. ngàyGiữa 1 và số ngày trong tháng nhất định của năm nhất định hoạt động được hỗ trợ Hoạt động Kết quả >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)20 ngày2 sẽ là >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)21 ngày sau ngày1. (1) >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)22 Tính date2 sao cho >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)23. (2) >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)24 (3) >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)25 date1 được coi là nhỏ hơn date2 khi date1 trước date2 về thời gian. (4) ghi chú
Trong ngữ cảnh Boolean, tất cả các đối tượng được coi là đúng Phương thức sơ thẩm ngày. thay thế(năm=chính mình. năm , tháng=mình. tháng , ngày=chính mình. ngày)Trả về một ngày có cùng giá trị, ngoại trừ các tham số được cung cấp giá trị mới theo bất kỳ đối số từ khóa nào được chỉ định Ví dụ >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)ngày. thời gian() Trả lại một chẳng hạn như được trả lại bởi Giờ, phút và giây là 0 và cờ DST là -1 >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)52 tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)0 trong đó >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)53 là số ngày trong năm hiện tại bắt đầu bằng >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.05 cho ngày 1 tháng 1ngày. bình thường() Trả về thứ tự Gregorian proleptic của ngày, trong đó ngày 1 tháng 1 của năm 1 có thứ tự 1. Đối với bất kỳ đối tượng d, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)09ngày. ngày trong tuần() Trả về ngày trong tuần dưới dạng số nguyên, trong đó Thứ Hai là 0 và Chủ nhật là 6. Ví dụ, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)57, thứ Tư. Xem thêmngày. ngày trong tuần() Trả về ngày trong tuần dưới dạng số nguyên, trong đó Thứ Hai là 1 và Chủ nhật là 7. Ví dụ, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)59, Thứ Tư. Xem thêm ,ngày. isocalendar() Trả về một đối tượng có ba thành phần. >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)1, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)63 và >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)64 Lịch ISO là một biến thể được sử dụng rộng rãi của lịch Gregorian. Năm ISO bao gồm 52 hoặc 53 tuần đầy đủ và trong đó một tuần bắt đầu vào Thứ Hai và kết thúc vào Chủ nhật. Tuần đầu tiên của một năm ISO là tuần dương lịch (Gregorian) đầu tiên của một năm có ngày thứ Năm. Đây được gọi là tuần số 1 và năm ISO của ngày thứ Năm đó giống với năm Gregorian của nó Ví dụ: năm 2004 bắt đầu vào Thứ Năm, vì vậy tuần đầu tiên của năm ISO 2004 bắt đầu vào Thứ Hai, ngày 29 tháng 12 năm 2003 và kết thúc vào Chủ Nhật, ngày 4 tháng 1 năm 2004 >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)1 Đã thay đổi trong phiên bản 3. 9. Kết quả đã thay đổi từ một bộ thành một. ngày. isoformat()Trả về một chuỗi đại diện cho ngày ở định dạng ISO 8601, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)12 >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)2ngày. __str__() Đối với một ngày d, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)66 tương đương với >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)67ngày. thời gian() Trả về một chuỗi đại diện cho ngày >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)3 >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)68 tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)4 trên các nền tảng có chức năng C >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)69 gốc (gọi, nhưng không gọi) tuân theo tiêu chuẩn Cngày. thời gian chạy(định dạng) Trả về một chuỗi đại diện cho ngày, được kiểm soát bởi một chuỗi định dạng rõ ràng. Mã định dạng đề cập đến giờ, phút hoặc giây sẽ thấy 0 giá trị. Để biết danh sách đầy đủ các chỉ thị định dạng, hãy xem ngày. __format__(định dạng)Giống như. Điều này giúp có thể chỉ định một chuỗi định dạng cho một đối tượng trong và khi sử dụng. Để biết danh sách đầy đủ các chỉ thị định dạng, hãy xem Ví dụ về cách sử dụng.Ví dụ về đếm số ngày đến một sự kiện >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)5 Thêm ví dụ về làm việc với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)6 Các đối tượngMột đối tượng là một đối tượng duy nhất chứa tất cả thông tin từ một đối tượng và một đối tượng Giống như một đối tượng, giả sử lịch Gregorian hiện tại được mở rộng theo cả hai hướng; Người xây dựng lớp ngày giờ. ngày giờ(năm , tháng, day, hour=0, minute=0, second=0, microsecond=0, tzinfo=None, *, fold=0)Các đối số năm, tháng và ngày là bắt buộc. tzinfo có thể là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc một thể hiện của lớp con. Các đối số còn lại phải là số nguyên trong các phạm vi sau
Nếu một đối số bên ngoài các phạm vi được đưa ra, được nâng lên Mới trong phiên bản 3. 6. Đã thêm đối số >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)96. Các hàm tạo khác, tất cả các phương thức của lớp phương thức lớp ngày giờ. hôm nay()Trả về ngày giờ địa phương hiện tại, với ____9_______03 Tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)7 Xem thêm , Phương thức này có chức năng tương đương với , nhưng không có tham số >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0002phương thức lớp ngày giờ. bây giờ(tz=Không) Trả về ngày và giờ địa phương hiện tại Nếu đối số tùy chọn tz là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc không được chỉ định, thì điều này giống như , nhưng, nếu có thể, cung cấp độ chính xác cao hơn mức có thể nhận được từ việc xem xét dấu thời gian (ví dụ: điều này có thể thực hiện được trên các nền tảng cung cấp hàm C >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0006) Nếu tz không phải là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, thì nó phải là một thể hiện của một lớp con và ngày giờ hiện tại được chuyển đổi thành múi giờ của tz Chức năng này được ưa thích hơn và phương thức lớp ngày giờ. utcnow()Trả về ngày và giờ UTC hiện tại, với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 Điều này giống như, nhưng trả về ngày và giờ UTC hiện tại, dưới dạng một đối tượng ngây thơ. Có thể nhận được thời gian UTC hiện tại đã biết bằng cách gọi >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0015. Xem thêm Cảnh báo Bởi vì các đối tượng >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 ngây thơ được nhiều phương thức >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 coi là giờ địa phương, nên sử dụng thời gian nhận biết để biểu thị thời gian theo UTC. Như vậy, cách được đề xuất để tạo một đối tượng biểu thị thời gian hiện tại theo UTC là gọi số >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0015phương thức lớp ngày giờ. dấu thời gian từ(dấu thời gian , tz=None) Trả về ngày và giờ cục bộ tương ứng với dấu thời gian POSIX, chẳng hạn như được trả về bởi. Nếu đối số tùy chọn tz là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc không được chỉ định, thì dấu thời gian được chuyển đổi thành ngày giờ địa phương của nền tảng và đối tượng được trả về là ngây thơ Nếu tz không phải là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, nó phải là một thể hiện của một lớp con và dấu thời gian được chuyển đổi thành múi giờ của tz có thể tăng , nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi các hàm C >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 hoặc >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 của nền tảng và trên >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 hoặc >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 không thành công. Điều này thường bị giới hạn trong các năm từ 1970 đến 2038. Lưu ý rằng trên các hệ thống không phải POSIX bao gồm giây nhuận trong khái niệm dấu thời gian, giây nhuận bị bỏ qua bởi , và sau đó có thể có hai dấu thời gian khác nhau một giây tạo ra các đối tượng giống hệt nhau. Phương pháp này được ưa chuộng hơn Đã thay đổi trong phiên bản 3. 3. Tăng thay vì nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi các hàm C >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 hoặc ________54____28 của nền tảng. Tăng thay vì khi thất bại >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)97 hoặc >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028. Đã thay đổi trong phiên bản 3. 6. có thể trả về các trường hợp được đặt thành 1. phương thức lớp ngày giờ. utcfromtimestamp(dấu thời gian)Trả lại UTC tương ứng với dấu thời gian POSIX, với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03. (Đối tượng kết quả là ngây thơ. ) Điều này có thể tăng , nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi chức năng C >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 của nền tảng và trên >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 không thành công. Điều này thường bị giới hạn trong các năm từ 1970 đến 2038 Để có được một đối tượng nhận thức, hãy gọi >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)8 Trên nền tảng tuân thủ POSIX, nó tương đương với biểu thức sau >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)9 ngoại trừ công thức sau luôn hỗ trợ phạm vi năm đầy đủ. giữa và bao gồm Cảnh báo Bởi vì các đối tượng >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 ngây thơ được nhiều phương thức >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 coi là giờ địa phương, nên sử dụng thời gian nhận biết để biểu thị thời gian theo UTC. Như vậy, cách được đề xuất để tạo một đối tượng đại diện cho một dấu thời gian cụ thể trong UTC là bằng cách gọi >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0058 Đã thay đổi trong phiên bản 3. 3. Tăng thay vì nếu dấu thời gian nằm ngoài phạm vi giá trị được hỗ trợ bởi hàm C >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 của nền tảng. Tăng thay vì trên >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0028 thất bại. phương thức lớp ngày giờ. từ thứ tự(thứ tự) Trả về tương ứng với thứ tự Gregorian proleptic, trong đó ngày 1 tháng 1 của năm 1 có thứ tự 1. được nâng lên trừ khi >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0067. Giờ, phút, giây và micro giây của kết quả đều bằng 0 và là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03phương thức lớp ngày giờ. kết hợp(ngày , thời gian . tzinfo, tzinfo=self.tzinfo) Trả về một đối tượng mới có các thành phần ngày bằng với đối tượng đã cho và có thành phần thời gian bằng với đối tượng đã cho. Nếu đối số tzinfo được cung cấp, giá trị của nó được sử dụng để đặt thuộc tính của kết quả, nếu không thì thuộc tính của đối số thời gian được sử dụng Đối với bất kỳ đối tượng d, >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0076. Nếu ngày là một đối tượng, các thành phần và thuộc tính thời gian của nó sẽ bị bỏ qua Đã thay đổi trong phiên bản 3. 6. Đã thêm đối số tzinfo. phương thức lớp ngày giờ. fromisoformat(date_string)Trả về một tương ứng với một chuỗi ngày ở bất kỳ định dạng ISO 8601 hợp lệ nào, với các ngoại lệ sau
ví dụ >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)0 Mới trong phiên bản 3. 7 Đã thay đổi trong phiên bản 3. 11. Trước đây, phương pháp này chỉ hỗ trợ các định dạng có thể được phát ra bởi hoặc. phương thức lớp ngày giờ. từ dương lịch(năm , tuần, day)Trả về một tương ứng với ngày theo lịch ISO được chỉ định theo năm, tuần và ngày. Các thành phần không phải ngày tháng của ngày giờ được điền bằng các giá trị mặc định bình thường của chúng. Đây là nghịch đảo của hàm Mới trong phiên bản 3. 8 phương thức lớp ngày giờ. strptime(date_string , định dạng)Trả về tương ứng với date_string, được phân tích cú pháp theo định dạng Điều này tương đương với >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)1 được nâng lên nếu không thể phân tích cú pháp chuỗi ngày và định dạng hoặc nếu nó trả về một giá trị không phải là bộ thời gian. Để biết danh sách đầy đủ các chỉ thị định dạng, hãy xem Thuộc tính lớp ngày giờ. phútĐại diện sớm nhất , >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0089ngày giờ. tối đa Đại diện mới nhất , >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0091ngày giờ. độ phân giải Sự khác biệt nhỏ nhất có thể giữa các đối tượng không bằng nhau, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)24 Thuộc tính phiên bản (chỉ đọc) ngày giờ. nămGiữa và bao gồm ngày giờ. thángTừ 1 đến 12 bao gồm ngày giờ. ngàyGiữa 1 và số ngày trong tháng nhất định của năm nhất định ngày giờ. giờTrong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0096ngày giờ. phút Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0097ngày giờ. giây Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0097ngày giờ. micro giây Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0099ngày giờ. tzinfo The object passed as the tzinfo argument to the constructor, or >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 if none was passeddatetime. fold In >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False02. Used to disambiguate wall times during a repeated interval. (A repeated interval occurs when clocks are rolled back at the end of daylight saving time or when the UTC offset for the current zone is decreased for political reasons. ) The value 0 (1) represents the earlier (later) of the two moments with the same wall time representation New in version 3. 6 hoạt động được hỗ trợ Hoạt động Kết quả >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False03 (1) >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False04 (2) >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False05 (3) >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False06 Compares to . (4)
Phương thức sơ thẩm datetime. date()Return object with same year, month and day datetime. time()Return object with same hour, minute, second, microsecond and fold. is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03. See also method Changed in version 3. 6. The fold value is copied to the returned object. datetime. timetz()Return object with same hour, minute, second, microsecond, fold, and tzinfo attributes. See also method Changed in version 3. 6. The fold value is copied to the returned object. datetime. replace(year=self. year , month=self. month , day=self. day , hour=self. giờ , phút=chính mình. phút , giây=chính mình. second , microsecond=self. microsecond , tzinfo=self. tzinfo , * , fold=0)Return a datetime with the same attributes, except for those attributes given new values by whichever keyword arguments are specified. Note that >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False52 can be specified to create a naive datetime from an aware datetime with no conversion of date and time data Mới trong phiên bản 3. 6. Đã thêm đối số >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)96. datetime. astimezone(tz=None) Return a object with new attribute tz, adjusting the date and time data so the result is the same UTC time as self, but in tz’s local time If provided, tz must be an instance of a subclass, and its and methods must not return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03. If self is naive, it is presumed to represent time in the system timezone If called without arguments (or with >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False60) the system local timezone is assumed for the target timezone. The >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False61 attribute of the converted datetime instance will be set to an instance of with the zone name and offset obtained from the OS If >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False63 is tz, >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False64 is equal to self. no adjustment of date or time data is performed. Else the result is local time in the timezone tz, representing the same UTC time as self. after >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False65, >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False66 will have the same date and time data as >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False67 If you merely want to attach a time zone object tz to a datetime dt without adjustment of date and time data, use >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False68. If you merely want to remove the time zone object from an aware datetime dt without conversion of date and time data, use >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False69 Note that the default method can be overridden in a subclass to affect the result returned by . Ignoring error cases, acts like >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)2 Changed in version 3. 3. tz now can be omitted. Changed in version 3. 6. The method can now be called on naive instances that are presumed to represent system local time. datetime. utcoffset()If is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, returns >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, else returns >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False78, and raises an exception if the latter doesn’t return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 or a object with magnitude less than one day Đã thay đổi trong phiên bản 3. 7. Phần bù UTC không bị giới hạn trong một số nguyên của phút. ngày giờ. dst()Nếu là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, trả về >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, nếu không thì trả về >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False84 và đưa ra một ngoại lệ nếu cái sau không trả về >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc một đối tượng có cường độ nhỏ hơn một ngày Đã thay đổi trong phiên bản 3. 7. DST offset không bị giới hạn trong một số phút. ngày giờ. tzname()Nếu là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, trả về >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, ngược lại trả về >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False90, đưa ra một ngoại lệ nếu cái sau không trả về >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc một đối tượng chuỗi,ngày giờ. thời gian() Trả lại một chẳng hạn như được trả lại bởi >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)52 tương đương với >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)3 trong đó >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)53 là số ngày trong năm hiện tại bắt đầu bằng >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.05 cho ngày 1 tháng 1. The >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False97 flag of the result is set according to the method. là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 hoặc trả về >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False97 được đặt thành >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "04; ngày giờ. utctimetuple() If instance d is naive, this is the same as >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)52 except that >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False97 is forced to 0 regardless of what >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "13 returns. DST is never in effect for a UTC time If d is aware, d is normalized to UTC time, by subtracting >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "14, and a for the normalized time is returned. >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False97 is forced to 0. Note that an may be raised if d. year was >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.04 or >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.08 and UTC adjustment spills over a year boundary Cảnh báo Because naive >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 objects are treated by many >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 methods as local times, it is preferred to use aware datetimes to represent times in UTC; as a result, using may give misleading results. If you have a naive >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False7 representing UTC, use >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "24 to make it aware, at which point you can use datetime. toordinal() Return the proleptic Gregorian ordinal of the date. The same as >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "26datetime. timestamp() Return POSIX timestamp corresponding to the instance. The return value is a similar to that returned by Naive instances are assumed to represent local time and this method relies on the platform C >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "31 function to perform the conversion. Since supports wider range of values than >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "31 on many platforms, this method may raise for times far in the past or far in the future For aware instances, the return value is computed as >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)4 New in version 3. 3 Changed in version 3. 6. The method uses the attribute to disambiguate the times during a repeated interval. Note There is no method to obtain the POSIX timestamp directly from a naive instance representing UTC time. If your application uses this convention and your system timezone is not set to UTC, you can obtain the POSIX timestamp by supplying >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "39 >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)5 or by calculating the timestamp directly >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)6datetime. weekday() Return the day of the week as an integer, where Monday is 0 and Sunday is 6. The same as >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "40. See also datetime. isoweekday() Return the day of the week as an integer, where Monday is 1 and Sunday is 7. The same as >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "42. See also , datetime. isocalendar() Return a with three components. >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)1, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)63 and >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)64. The same as >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "48datetime. isoformat(sep='T' , timespec='auto') Return a string representing the date and time in ISO 8601 format
If does not return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, a string is appended, giving the UTC offset
ví dụ >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)7 The optional argument sep (default >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "59) is a one-character separator, placed between the date and time portions of the result. For example >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)8 The optional argument timespec specifies the number of additional components of the time to include (the default is >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "60). It can be one of the following
Note Excluded time components are truncated, not rounded will be raised on an invalid timespec argument >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)9 New in version 3. 6. Added the timespec argument. datetime. __str__()For a instance d, >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)66 is equivalent to >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "84datetime. ctime() Return a string representing the date and time >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:000 The output string will not include time zone information, regardless of whether the input is aware or naive >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)68 tương đương với >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)4 trên các nền tảng có chức năng C >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)69 gốc (gọi, nhưng không gọi) tuân theo tiêu chuẩn Cdatetime. strftime(format) Return a string representing the date and time, controlled by an explicit format string. For a complete list of formatting directives, see datetime. __format__(format)Giống như. Điều này giúp có thể chỉ định một chuỗi định dạng cho một đối tượng trong và khi sử dụng. Để biết danh sách đầy đủ các chỉ thị định dạng, hãy xem Ví dụ về cách sử dụng.Examples of working with objects >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:002 The example below defines a subclass capturing time zone information for Kabul, Afghanistan, which used +4 UTC until 1945 and then +4. 30 UTC thereafter >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:003 Usage of >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "95 from above >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:004 Các đối tượngA object represents a (local) time of day, independent of any particular day, and subject to adjustment via a object class datetime. time(hour=0 , minute=0 , second=0 , microsecond=0 , tzinfo=None , * , fold=0)All arguments are optional. tzinfo may be >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, or an instance of a subclass. The remaining arguments must be integers in the following ranges
If an argument outside those ranges is given, is raised. All default to >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)14 except tzinfo, which defaults to Thuộc tính lớp time. minThe earliest representable , >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.010time. max The latest representable , >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.012time. resolution The smallest possible difference between non-equal objects, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)24, although note that arithmetic on objects is not supported Thuộc tính phiên bản (chỉ đọc) time. hourTrong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0096time. minute Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0097time. second Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0097time. microsecond Trong >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:0099time. tzinfo The object passed as the tzinfo argument to the constructor, or >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 if none was passedtime. fold In >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False02. Used to disambiguate wall times during a repeated interval. (A repeated interval occurs when clocks are rolled back at the end of daylight saving time or when the UTC offset for the current zone is decreased for political reasons. ) The value 0 (1) represents the earlier (later) of the two moments with the same wall time representation New in version 3. 6 objects support comparison of to , where a is considered less than b when a precedes b in time. If one comparand is naive and the other is aware, is raised if an order comparison is attempted. Để so sánh bình đẳng, các trường hợp ngây thơ không bao giờ bằng các trường hợp nhận thức If both comparands are aware, and have the same attribute, the common attribute is ignored and the base times are compared. If both comparands are aware and have different attributes, the comparands are first adjusted by subtracting their UTC offsets (obtained from >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False30). Để ngăn các so sánh kiểu hỗn hợp quay trở lại so sánh mặc định theo địa chỉ đối tượng, khi một đối tượng được so sánh với một đối tượng thuộc loại khác, sẽ được nâng lên trừ khi phép so sánh là >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)75 hoặc >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)76. The latter cases return or , respectively Changed in version 3. 3. Equality comparisons between aware and naive instances don’t raise . In Boolean contexts, a object is always considered to be true Changed in version 3. 5. Before Python 3. 5, a object was considered to be false if it represented midnight in UTC. This behavior was considered obscure and error-prone and has been removed in Python 3. 5. See bpo-13936 for full details. Other constructor classmethod time. fromisoformat(time_string)Return a corresponding to a time_string in any valid ISO 8601 format, with the following exceptions
ví dụ >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:005 Mới trong phiên bản 3. 7 Changed in version 3. 11. Previously, this method only supported formats that could be emitted by . Phương thức sơ thẩm time. replace(hour=self. hour , minute=self. minute , second=self. second , microsecond=self. microsecond , tzinfo=self. tzinfo , * , fold=0)Return a with the same value, except for those attributes given new values by whichever keyword arguments are specified. Note that >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False52 can be specified to create a naive from an aware , without conversion of the time data Mới trong phiên bản 3. 6. Đã thêm đối số >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)96. time. isoformat(timespec='auto') Return a string representing the time in ISO 8601 format, one of
The optional argument timespec specifies the number of additional components of the time to include (the default is >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "60). It can be one of the following
Note Excluded time components are truncated, not rounded will be raised on an invalid timespec argument Ví dụ >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:006 New in version 3. 6. Added the timespec argument. time. __str__()For a time t, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)55 is equivalent to >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.083time. strftime(format) Return a string representing the time, controlled by an explicit format string. For a complete list of formatting directives, see time. __format__(format)Giống như. Điều này giúp có thể chỉ định một chuỗi định dạng cho một đối tượng trong và khi sử dụng. Để biết danh sách đầy đủ các chỉ thị định dạng, hãy xem time. utcoffset()If is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, returns >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, else returns >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.090, and raises an exception if the latter doesn’t return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 or a object with magnitude less than one day Đã thay đổi trong phiên bản 3. 7. Phần bù UTC không bị giới hạn trong một số nguyên của phút. time. dst()If is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, returns >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, else returns >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.096, and raises an exception if the latter doesn’t return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, or a object with magnitude less than one day Đã thay đổi trong phiên bản 3. 7. DST offset không bị giới hạn trong một số phút. thời gian. tzname()If is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, returns >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, else returns >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)02, or raises an exception if the latter doesn’t return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 or a string object Ví dụ về cách sử dụng.Examples of working with a object >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:007 Các đối tượnglớp ngày giờ. tzinfoThis is an abstract base class, meaning that this class should not be instantiated directly. Define a subclass of to capture information about a particular time zone An instance of (a concrete subclass of) can be passed to the constructors for and objects. The latter objects view their attributes as being in local time, and the object supports methods revealing offset of local time from UTC, the name of the time zone, and DST offset, all relative to a date or time object passed to them You need to derive a concrete subclass, and (at least) supply implementations of the standard methods needed by the methods you use. The module provides , a simple concrete subclass of which can represent timezones with fixed offset from UTC such as UTC itself or North American EST and EDT Special requirement for pickling. A subclass must have an >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)18 method that can be called with no arguments, otherwise it can be pickled but possibly not unpickled again. This is a technical requirement that may be relaxed in the future A concrete subclass of may need to implement the following methods. Exactly which methods are needed depends on the uses made of aware objects. If in doubt, simply implement all of them tzinfo. utcoffset(dt)Return offset of local time from UTC, as a object that is positive east of UTC. If local time is west of UTC, this should be negative This represents the total offset from UTC; for example, if a object represents both time zone and DST adjustments, should return their sum. If the UTC offset isn’t known, return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03. Else the value returned must be a object strictly between >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)26 and >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)27 (the magnitude of the offset must be less than one day). Most implementations of will probably look like one of these two >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:008 If does not return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, should not return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 either The default implementation of raises Đã thay đổi trong phiên bản 3. 7. Phần bù UTC không bị giới hạn trong một số nguyên của phút. tzinfo. dst(dt)Return the daylight saving time (DST) adjustment, as a object or >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 if DST information isn’t known Return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)83 if DST is not in effect. If DST is in effect, return the offset as a object (see for details). Note that DST offset, if applicable, has already been added to the UTC offset returned by , so there’s no need to consult unless you’re interested in obtaining DST info separately. For example, calls its attribute’s method to determine how the >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False97 flag should be set, and calls to account for DST changes when crossing time zones An instance tz of a subclass that models both standard and daylight times must be consistent in this sense >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)49 must return the same result for every dt with >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)51 For sane subclasses, this expression yields the time zone’s “standard offset”, which should not depend on the date or the time, but only on geographic location. The implementation of relies on this, but cannot detect violations; it’s the programmer’s responsibility to ensure it. If a subclass cannot guarantee this, it may be able to override the default implementation of to work correctly with >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False72 regardless Most implementations of will probably look like one of these two >>> timedelta(hours=-5) datetime.timedelta(days=-1, seconds=68400) >>> print(_) -1 day, 19:00:009 or >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False0 The default implementation of raises Đã thay đổi trong phiên bản 3. 7. DST offset không bị giới hạn trong một số phút. tzinfo. tzname(dt)Return the time zone name corresponding to the object dt, as a string. Nothing about string names is defined by the module, and there’s no requirement that it mean anything in particular. For example, “GMT”, “UTC”, “-500”, “-5. 00”, “EDT”, “US/Eastern”, “America/New York” are all valid replies. Return >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 if a string name isn’t known. Note that this is a method rather than a fixed string primarily because some subclasses will wish to return different names depending on the specific value of dt passed, especially if the class is accounting for daylight time The default implementation of raises These methods are called by a or object, in response to their methods of the same names. A object passes itself as the argument, and a object passes >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 as the argument. A subclass’s methods should therefore be prepared to accept a dt argument of >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03, or of class When >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 is passed, it’s up to the class designer to decide the best response. For example, returning >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03 is appropriate if the class wishes to say that time objects don’t participate in the protocols. Có thể hữu ích hơn khi >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)78 trả về phần bù UTC tiêu chuẩn, vì không có quy ước nào khác để khám phá phần bù tiêu chuẩn When a object is passed in response to a method, >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)81 is the same object as self. methods can rely on this, unless user code calls methods directly. Mục đích là các phương thức diễn giải dt theo giờ địa phương và không cần lo lắng về các đối tượng trong các múi giờ khác There is one more method that a subclass may wish to override tzinfo. fromutc(dt)This is called from the default implementation. When called from that, >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)81 is self, and dt’s date and time data are to be viewed as expressing a UTC time. The purpose of is to adjust the date and time data, returning an equivalent datetime in self’s local time Most subclasses should be able to inherit the default implementation without problems. It’s strong enough to handle fixed-offset time zones, and time zones accounting for both standard and daylight time, and the latter even if the DST transition times differ in different years. An example of a time zone the default implementation may not handle correctly in all cases is one where the standard offset (from UTC) depends on the specific date and time passed, which can happen for political reasons. The default implementations of >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False72 and may not produce the result you want if the result is one of the hours straddling the moment the standard offset changes Skipping code for error cases, the default implementation acts like >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False1 In the following >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)95 file there are some examples of classes >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False2 Note that there are unavoidable subtleties twice per year in a subclass accounting for both standard and daylight time, at the DST transition points. For concreteness, consider US Eastern (UTC -0500), where EDT begins the minute after 1. 59 (EST) on the second Sunday in March, and ends the minute after 1. 59 (EDT) on the first Sunday in November >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False3 When DST starts (the “start” line), the local wall clock leaps from 1. 59 to 3. 00. A wall time of the form 2. MM doesn’t really make sense on that day, so >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)98 won’t deliver a result with >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)99 on the day DST begins. For example, at the Spring forward transition of 2016, we get >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False4 When DST ends (the “end” line), there’s a potentially worse problem. there’s an hour that can’t be spelled unambiguously in local wall time. the last hour of daylight time. In Eastern, that’s times of the form 5. MM UTC on the day daylight time ends. The local wall clock leaps from 1. 59 (daylight time) back to 1. 00 (standard time) again. Local times of the form 1. MM are ambiguous. >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False72 mimics the local clock’s behavior by mapping two adjacent UTC hours into the same local hour then. In the Eastern example, UTC times of the form 5. MM and 6. MM both map to 1. MM when converted to Eastern, but earlier times have the attribute set to 0 and the later times have it set to 1. For example, at the Fall back transition of 2016, we get >>> from datetime import timedelta >>> delta1 = timedelta(seconds=57) >>> delta2 = timedelta(hours=25, seconds=2) >>> delta2 != delta1 True >>> delta2 == 5 False5 Note that the instances that differ only by the value of the attribute are considered equal in comparisons Applications that can’t bear wall-time ambiguities should explicitly check the value of the attribute or avoid using hybrid subclasses; there are no ambiguities when using , or any other fixed-offset subclass (such as a class representing only EST (fixed offset -5 hours), or only EDT (fixed offset -4 hours)) Xem thêm IANA timezone database The Time Zone Database (often called tz, tzdata or zoneinfo) contains code and data that represent the history of local time for many representative locations around the globe. It is updated periodically to reflect changes made by political bodies to time zone boundaries, UTC offsets, and daylight-saving rules Các đối tượngThe class is a subclass of , each instance of which represents a timezone defined by a fixed offset from UTC Objects of this class cannot be used to represent timezone information in the locations where different offsets are used in different days of the year or where historical changes have been made to civil time class datetime. timezone(offset , name=None)The offset argument must be specified as a object representing the difference between the local time and UTC. It must be strictly between >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)26 and >>> from datetime import timedelta >>> year = timedelta(days=365) >>> ten_years = 10 * year >>> ten_years datetime.timedelta(days=3650) >>> ten_years.days // 365 10 >>> nine_years = ten_years - year >>> nine_years datetime.timedelta(days=3285) >>> three_years = nine_years // 3 >>> three_years, three_years.days // 365 (datetime.timedelta(days=1095), 3)27, otherwise is raised The name argument is optional. Nếu được chỉ định, nó phải là một chuỗi sẽ được sử dụng làm giá trị được trả về bởi phương thức Mới trong phiên bản 3. 2 Đã thay đổi trong phiên bản 3. 7. Phần bù UTC không bị giới hạn trong một số nguyên của phút. timezone. utcoffset(dt)Return the fixed value specified when the instance is constructed The dt argument is ignored. The return value is a instance equal to the difference between the local time and UTC Đã thay đổi trong phiên bản 3. 7. Phần bù UTC không bị giới hạn trong một số nguyên của phút. timezone. tzname(dt)Return the fixed value specified when the instance is constructed If name is not provided in the constructor, the name returned by >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)24 is generated from the value of the >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)25 as follows. If offset is >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)83, the name is “UTC”, otherwise it is a string in the format >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)27, where ± is the sign of >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)25, HH and MM are two digits of >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)29 and >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)30 respectively Changed in version 3. 6. Name generated from >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)31 is now plain >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)32, not >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)33. timezone. dst(dt) Always returns >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)03timezone. fromutc(dt) Return >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)35. The dt argument must be an aware instance, with >>> delta2 > delta1 True >>> delta2 > 5 Traceback (most recent call last): File "4 set to >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)38 Thuộc tính lớp timezone. utcThe UTC timezone, >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)39 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4) 40 and >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4) 41 Behavior, , and objects all support a >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)45 method, to create a string representing the time under the control of an explicit format string Conversely, the class method creates a object from a string representing a date and time and a corresponding format string The table below provides a high-level comparison of >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)40 versus >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)41 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)50 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)51 Usage Convert object to a string according to a given format Parse a string into a object given a corresponding format Type of method Instance method Class method Method of ; ; Signature >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)45 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)58 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4) 40 and >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4) 41 Format CodesThe following is a list of all the format codes that the 1989 C standard requires, and these work on all platforms with a standard C implementation Directive Meaning Ví dụ Notes >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)61 Weekday as locale’s abbreviated name CN, Mon, …, Sat (en_US); So, Mo, …, Sa (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)62 Weekday as locale’s full name Sunday, Monday, …, Saturday (en_US); Sonntag, Montag, …, Samstag (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)63 Weekday as a decimal number, where 0 is Sunday and 6 is Saturday 0, 1, …, 6 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)64 Day of the month as a zero-padded decimal number 01, 02, …, 31 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)65 Tháng là tên viết tắt của ngôn ngữ Jan, Feb, …, Dec (en_US); Jan, Feb, …, Dez (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)66 Month as locale’s full name January, February, …, December (en_US); Januar, Februar, …, Dezember (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)67 Month as a zero-padded decimal number 01, 02, …, 12 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)68 Year without century as a zero-padded decimal number 00, 01, …, 99 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)69 Year with century as a decimal number 0001, 0002, …, 2013, 2014, …, 9998, 9999 (2) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)70 Hour (24-hour clock) as a zero-padded decimal number 00, 01, …, 23 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)71 Hour (12-hour clock) as a zero-padded decimal number 01, 02, …, 12 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)72 Locale’s equivalent of either AM or PM AM, PM (en_US); am, pm (de_DE) (1), (3) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)73 Minute as a zero-padded decimal number 00, 01, …, 59 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)74 Second as a zero-padded decimal number 00, 01, …, 59 (4), (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)75 Microsecond as a decimal number, zero-padded to 6 digits 000000, 000001, …, 999999 (5) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)76 UTC offset in the form >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)77 (empty string if the object is naive) (empty), +0000, -0400, +1030, +063415, -030712. 345216 (6) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)78 Time zone name (empty string if the object is naive) (trống), UTC, GMT (6) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)79 Day of the year as a zero-padded decimal number 001, 002, …, 366 (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)80 Week number of the year (Sunday as the first day of the week) as a zero-padded decimal number. All days in a new year preceding the first Sunday are considered to be in week 0 00, 01, …, 53 (7), (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)81 Week number of the year (Monday as the first day of the week) as a zero-padded decimal number. All days in a new year preceding the first Monday are considered to be in week 0 00, 01, …, 53 (7), (9) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)82 Locale’s appropriate date and time representation Tue Aug 16 21. 30. 00 1988 (en_US); Di 16 Aug 21. 30. 00 1988 (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)83 Locale’s appropriate date representation 08/16/88 (None); 08/16/1988 (en_US); 16. 08. 1988 (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)84 Locale’s appropriate time representation 21. 30. 00 (en_US); 21. 30. 00 (de_DE) (1) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)85 A literal >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)86 character % Several additional directives not required by the C89 standard are included for convenience. These parameters all correspond to ISO 8601 date values Directive Meaning Ví dụ Notes >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)87 ISO 8601 year with century representing the year that contains the greater part of the ISO week ( >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)88) 0001, 0002, …, 2013, 2014, …, 9998, 9999 (8) >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)89 ISO 8601 weekday as a decimal number where 1 is Monday 1, 2, …, 7 >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)88 ISO 8601 week as a decimal number with Monday as the first day of the week. Week 01 is the week containing Jan 4 01, 02, …, 53 (8), (9) These may not be available on all platforms when used with the >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)40 method. The ISO 8601 year and ISO 8601 week directives are not interchangeable with the year and week number directives above. Calling >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)41 with incomplete or ambiguous ISO 8601 directives will raise a The full set of format codes supported varies across platforms, because Python calls the platform C library’s >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)40 function, and platform variations are common. To see the full set of format codes supported on your platform, consult the strftime(3) documentation. There are also differences between platforms in handling of unsupported format specifiers Mới trong phiên bản 3. 6. >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)87, >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)89 and >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)88 were added. Technical DetailNói chung, >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)98 hoạt động giống như mô-đun >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)00 mặc dù không phải tất cả các đối tượng đều hỗ trợ phương thức >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)42 Đối với phương thức của lớp, giá trị mặc định là >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)03. any components not specified in the format string will be pulled from the default value. Using >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)04 is equivalent to >>> from datetime import timedelta >>> d = timedelta(microseconds=-1) >>> (d.days, d.seconds, d.microseconds) (-1, 86399, 999999)1 trừ khi định dạng bao gồm các thành phần giây phụ hoặc thông tin bù múi giờ, được hỗ trợ trong >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)05 nhưng bị loại bỏ bởi >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)06 For objects, the format codes for year, month, and day should not be used, as objects have no such values. If they’re used anyway, >>> from datetime import date >>> d = date(2002, 12, 31) >>> d.replace(day=26) datetime.date(2002, 12, 26)09 is substituted for the year, and >>> # Components of another_year add up to exactly 365 days >>> from datetime import timedelta >>> year = timedelta(days=365) >>> another_year = timedelta(weeks=40, days=84, hours=23, .. minutes=50, seconds=600) >>> year == another_year True >>> year.total_seconds() 31536000.05 for the month and day For objects, the format codes for hours, minutes, seconds, and microseconds should not be used, as objects have no such values. If they’re used anyway, >>> from datetime import timedelta >>> delta = timedelta( .. days=50, .. seconds=27, .. microseconds=10, .. milliseconds=29000, .. minutes=5, .. hours=8, .. weeks=2 .. ) >>> # Only days, seconds, and microseconds remain >>> delta datetime.timedelta(days=64, seconds=29156, microseconds=10)14 is substituted for them For the same reason, handling of format strings containing Unicode code points that can’t be represented in the charset of the current locale is also platform-dependent. Trên một số nền tảng, các điểm mã như vậy được giữ nguyên trong đầu ra, trong khi trên các nền tảng khác, thay vào đó, >>> from datetime import date >>> date.fromisoformat('2019-12-04') datetime.date(2019, 12, 4) >>> date.fromisoformat('20191204') datetime.date(2019, 12, 4) >>> date.fromisoformat('2021-W01-1') datetime.date(2021, 1, 4)50 có thể tăng hoặc trả về một chuỗi trống ghi chú
Footnotes If, that is, we ignore the effects of Relativity This matches the definition of the “proleptic Gregorian” calendar in Dershowitz and Reingold’s book Calendrical Calculations, where it’s the base calendar for all computations. Xem sách để biết các thuật toán chuyển đổi giữa các thứ tự Gregorian proleptic và nhiều hệ thống lịch khác |