Hướng dẫn convert string to number c++ - chuyển đổi chuỗi thành số C++
Giải pháp mạnh mẽ C89 ________ 15 Show
With:
Github ngược dòng. Dựa trên: https://stackoverflow.com/a/6154614/895245 Chuyển đổi số thành chuỗi hoặc ngược lại là một chút khó hiểu. Chúng ta có thể phải thực hiện các chuyển đổi như vậy trong khi làm việc với các số và chuỗi với nhau. Mặc dù là các hoạt động đơn giản, nhiều lập trình viên hoặc thất bại hoặc bị nhầm lẫn trong khi làm điều này. & nbsp; Trước khi biết làm thế nào chúng ta nên chuyển đổi chuỗi thành số, nhu cầu chuyển đổi là gì: & nbsp; Bạn sẽ gặp lỗi nếu bạn cố gắng nhập một giá trị không được chấp nhận với kiểu dữ liệu. Cả C/C ++ là một ngôn ngữ được gõ mạnh. Bạn sẽ gặp lỗi nếu bạn cố gắng nhập một giá trị không được chấp nhận với kiểu dữ liệu. Không chỉ trong các đầu vào mà bạn sẽ gặp lỗi trong khi thực hiện các hoạt động. Có một cơ hội công bằng để nhận được cả cú pháp và lỗi logic. Ví dụ: giả sử chúng tôi có một chuỗi số là 673, mà chúng tôi muốn chuyển đổi thành một loại số. Chúng tôi sẽ cần sử dụng & nbsp; một hàm chuyển đổi một chuỗi thành số nguyên và trả về 673 làm giá trị số. Hơn nữa, việc chuyển đổi một văn bản thành một số nguyên khó khăn hơn so với việc chuyển đổi đôi sang số nguyên bằng cách sử dụng loại đúc. Chúng tôi không được phép thực hiện đúc loại vì cả hai và chuỗi không nằm trong cùng một hệ thống phân cấp đối tượng.We are not allowed to perform type casting because int and string both are not in the same Object hierarchy. Ví dụ: bạn không thể làm điều này vì nó sẽ gây ra lỗi C++// A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;8 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;9 int sscanf ( const char * s, const char * format, ...);0 int sscanf ( const char * s, const char * format, ...);1 int sscanf ( const char * s, const char * format, ...);2 int sscanf ( const char * s, const char * format, ...);3 int sscanf ( const char * s, const char * format, ...);4 int sscanf ( const char * s, const char * format, ...);5 int sscanf ( const char * s, const char * format, ...);6 int sscanf ( const char * s, const char * format, ...);7 int sscanf ( const char * s, const char * format, ...);4 int sscanf ( const char * s, const char * format, ...);2 The value of x : 123450 int sscanf ( const char * s, const char * format, ...);4 The value of x : 123452 int sscanf ( const char * s, const char * format, ...);222 The value of x : 123455 Lỗi sau khi biên dịch sẽ là:
Đối với chuyển đổi số thành chuỗi, hãy tham khảo bài viết - chuyển đổi số thành chuỗi trong C ++– Converting Numbers to String in C++ Chuyển đổi chuỗi thành sốCó 3 phương pháp chính để chuyển đổi một số thành một chuỗi, như sau:
1. Sử dụng lớp Chuỗi hoặc sscanf ()StringStream (): Đây là một cách dễ dàng để chuyển đổi chuỗi các chữ số thành ints, phao hoặc đôi. Một luồng số khai báo một đối tượng luồng đầu tiên chèn một chuỗi, dưới dạng một số vào một đối tượng và sau đó sử dụng ‘StringStream (), để tuân theo chuyển đổi nội bộ. This is an easy way to convert strings of digits into ints, floats, or doubles. A number stream declares a stream object which first inserts a string, as a number into an object, and then uses ‘stringstream()’ to follow the internal conversion. Để sử dụng nó, trước tiên, & nbsp; thêm dòng #include vào đầu chương trình của bạn & nbsp; để bao gồm thư viện SStream. Sau đó, chuỗi chuỗi được thêm vào và một đối tượng chuỗi được tạo, sẽ giữ lại giá trị của chuỗi bạn muốn chuyển đổi thành int và sẽ được sử dụng & nbsp; trong quá trình chuyển đổi. Để trích xuất chuỗi từ biến chuỗi, & nbsp; sử dụng toán tử <& nbsp; Tiếp theo, bạn nhập giá trị INT mới được chuyển đổi vào biến INT bằng toán tử >>. Example: CPPThe value of x : 123456 The value of x : 123457 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;9 int sscanf ( const char * s, const char * format, ...);0 int sscanf ( const char * s, const char * format, ...);1 int sscanf ( const char * s, const char * format, ...);2 int sscanf ( const char * s, const char * format, ...);3 The value of x : 12345.5400393 The value of x : 12345.5400394 The value of x : 12345.5400395 The value of x : 12345.5400396 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 The value of x : 12345.5400399 int sscanf ( const char * s, const char * format, ...);4 int sscanf ( const char * s, const char * format, ...);2 The value of x : 123450 The value of x : 12345.5400394 The value of x : 12345.540039 // output of floating number4 int sscanf ( const char * s, const char * format, ...);4 The value of x : 123452 int sscanf ( const char * s, const char * format, ...);222 Lỗi sau khi biên dịch sẽ là: The value of x : 123455 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt; HELLP.CPP: 9: 10: Lỗi: Không chuyển đổi phù hợp cho Cast kiểu C từ 'std :: __ 1 :: String' (AKA & nbsp; & nbsp; 'basic_string') sang 'int' & nbsp; num = (int) str; & nbsp; & nbsp; & nbsp; & nbsp; toán tử __Self_view () const _noExcept {return __elf_view (data (), size ()); } & nbsp; ^1 lỗi được tạo ra.sscanf()‘ is a C style function similar to scanf(). It reads input from a string rather than standard input. Đối với chuyển đổi số thành chuỗi, hãy tham khảo bài viết - chuyển đổi số thành chuỗi trong C ++ int sscanf ( const char * s, const char * format, ...); Chuyển đổi chuỗi thành số: Integer Parameters::
Sử dụng atoi () & nbsp; 1. Sử dụng lớp Chuỗi hoặc sscanf () C++The value of x : 123456 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;9 int sscanf ( const char * s, const char * format, ...);0 int sscanf ( const char * s, const char * format, ...);1 int sscanf ( const char * s, const char * format, ...);2 int sscanf ( const char * s, const char * format, ...);3 The value of x : 12345.5400393 int sscanf ( const char * s, const char * format, ...);4 int sscanf ( const char * s, const char * format, ...);2 The value of x : 123450 int sscanf ( const char * s, const char * format, ...);4 The value of x : 123452 int sscanf ( const char * s, const char * format, ...);222 The value of x : 12345.5400394 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313370 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313371 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313372 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313373 Lỗi sau khi biên dịch sẽ là: Lỗi sau khi biên dịch sẽ là: The value of x : 123455 HELLP.CPP: 9: 10: Lỗi: Không chuyển đổi phù hợp cho Cast kiểu C từ 'std :: __ 1 :: String' (AKA & nbsp; & nbsp; 'basic_string') sang 'int' & nbsp; num = (int) str; & nbsp; & nbsp; & nbsp; & nbsp; toán tử __Self_view () const _noExcept {return __elf_view (data (), size ()); } & nbsp; ^1 lỗi được tạo ra.Đối với chuyển đổi số thành chuỗi, hãy tham khảo bài viết - chuyển đổi số thành chuỗi trong C ++ int sscanf ( const char * s, const char * format, ...);2 int sscanf ( const char * s, const char * format, ...);3 The value of x : 12345.5400393 int sscanf ( const char * s, const char * format, ...);4 int sscanf ( const char * s, const char * format, ...);2 The value of x : 123450 int sscanf ( const char * s, const char * format, ...);4 The value of x : 123452 int sscanf ( const char * s, const char * format, ...);222 The value of x : 12345.5400394 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313370 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313371 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313372 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313373 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;11 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;12 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;13 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;14 The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 The value of x : 123455 Đầu ra The value of x : 12345 Tương tự, chúng ta có thể đọc float và gấp đôi sử dụng %F và %LF tương ứng.%f and %lf respectively. Cstoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313372 int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400393 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String1 | | |___> integer | |_______> to |__________> String2 | | |___> integer | |_______> to |__________> String3 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;27 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;30 | | |___> integer | |_______> to |__________> String8 The value of x : 12345.5400394 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313370 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313371 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;35 stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313373 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;11 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;12 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;40 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;14 The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 The value of x : 123455 Đầu ra The value of x : 12345.540039 Tương tự, chúng ta có thể đọc float và gấp đôi sử dụng %F và %LF tương ứng. The value of x : 12345.540039 // output of floating number C The value of x : 12345.540000 // output of double number
int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400394| | |___> integer | |_______> to |__________> String 1 | | |___> integer | |_______> to |__________> String 2| | |___> integer | |_______> to |__________> String 3// A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt; 27int sscanf ( const char * s, const char * format, ...);7
Đầu ra 1: | | |___> integer | |_______> to |__________> String Example: Đầu ra 2:The value of x : 123456 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;8 Nếu các giá trị giống nhau thì tại sao các đầu ra lại khác nhau? int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400393 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;55 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;56 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;59 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;60 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;63 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;64 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String1 | | |___> integer | |_______> to |__________> String2 | | |___> integer | |_______> to |__________> String3 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;27 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;30 | | |___> integer | |_______> to |__________> String8 Đầu ra 1: Đầu ra 2: Nếu các giá trị giống nhau thì tại sao các đầu ra lại khác nhau? Lý do đằng sau điều này là các số nổi là tất cả về tốc độ, độ chính xác và sự thuận tiện ngoài việc chúng sử dụng biểu diễn nhị phân để hiển thị đầu ra của chúng phần nào đưa đầu ra đến gần đúng nhất; Đó là lý do tại sao có những chữ số phụ ở cuối đầu ra. Ngoài ra, với số lượng gấp đôi, giá trị sẽ được hiển thị bởi vì gấp đôi là tất cả về độ chính xác và độ tin cậy, mặc dù nó tiêu thụ nhiều không gian hơn phao và cũng chậm hơn một chút so với số nổi. & NBSP; // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;81 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;82 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;83 int sscanf ( const char * s, const char * format, ...);7 2. Chuyển đổi chuỗi bằng stoi () // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;81 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;82 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;83 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 The value of x : 123455 Đầu ra stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 31337 Output:: stoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 31337 Tương tự, chúng ta có thể đọc float và gấp đôi sử dụng %F và %LF tương ứng.Catoi() a little closer you will find out that it stands for: // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;0 Example: C++14int sscanf ( const char * s, const char * format, ...);09 The value of x : 123456 Nếu các giá trị giống nhau thì tại sao các đầu ra lại khác nhau? int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400393 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String1 | | |___> integer | |_______> to |__________> String2 | | |___> integer | |_______> to |__________> String3 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;27 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;30 | | |___> integer | |_______> to |__________> String8 Đầu ra 1: Đầu ra 2: Nếu các giá trị giống nhau thì tại sao các đầu ra lại khác nhau? Lý do đằng sau điều này là các số nổi là tất cả về tốc độ, độ chính xác và sự thuận tiện ngoài việc chúng sử dụng biểu diễn nhị phân để hiển thị đầu ra của chúng phần nào đưa đầu ra đến gần đúng nhất; Đó là lý do tại sao có những chữ số phụ ở cuối đầu ra. Ngoài ra, với số lượng gấp đôi, giá trị sẽ được hiển thị bởi vì gấp đôi là tất cả về độ chính xác và độ tin cậy, mặc dù nó tiêu thụ nhiều không gian hơn phao và cũng chậm hơn một chút so với số nổi. & NBSP; 2. Chuyển đổi chuỗi bằng stoi () stoi (): hàm stoi () lấy một chuỗi làm đối số và trả về giá trị của nó ở dạng số nguyên. Cách tiếp cận này là phổ biến trong các phiên bản hiện tại của C ++ và lần đầu tiên nó được giới thiệu trong C ++ 11. Và nếu bạn quan sát stoi () gần hơn một chút, bạn sẽ phát hiện ra rằng điều đó cho: & nbsp; & nbsp; s & nbsp; & nbsp; đến & nbsp; & nbsp; tôi() The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 The value of x : 123455 Cstoi("45") is 45 stoi("3.14159") is 3 stoi("31337 geek") is 313372 int sscanf ( const char * s, const char * format, ...);79 int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400393 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String2 int sscanf ( const char * s, const char * format, ...);20 int sscanf ( const char * s, const char * format, ...);21 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String2 int sscanf ( const char * s, const char * format, ...);26 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;60 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String2 int sscanf ( const char * s, const char * format, ...);32 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;64 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String1 | | |___> integer | |_______> to |__________> String2 | | |___> integer | |_______> to |__________> String3 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;27 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;30 | | |___> integer | |_______> to |__________> String8 Đầu ra 1: The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;11 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;12 The value of x : 1234516 The value of x : 1234517 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;11 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;12 The value of x : 1234516 The value of x : 1234522 The value of x : 12345.5400394 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;11 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;12 The value of x : 1234516 The value of x : 1234527 The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 Đầu ra 2: Đầu ra // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;1 Tương tự, chúng ta có thể đọc float và gấp đôi sử dụng %F và %LF tương ứng.Catoi() is a legacy C-style function. stoi() is added in C++ 11.
// A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;2
// A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;3
C++int sscanf ( const char * s, const char * format, ...);09 The value of x : 123456 Nếu các giá trị giống nhau thì tại sao các đầu ra lại khác nhau? int sscanf ( const char * s, const char * format, ...);2 The value of x : 12345.5400392 The value of x : 12345.5400393 The value of x : 12345.5400394 | | |___> integer | |_______> to |__________> String1 | | |___> integer | |_______> to |__________> String2 | | |___> integer | |_______> to |__________> String3 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;27 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 The value of x : 1234547 int sscanf ( const char * s, const char * format, ...);37 The value of x : 1234549 int sscanf ( const char * s, const char * format, ...);39 The value of x : 12345.5400394 The value of x : 12345.540039 // output of floating number6 The value of x : 1234553 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;78 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;79 int sscanf ( const char * s, const char * format, ...);55 // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;83 int sscanf ( const char * s, const char * format, ...);7 The value of x : 12345.5400394 The value of x : 12345.540000 // output of double number0 The value of x : 12345.540000 // output of double number1 The value of x : 123455 Đầu ra // A stringstream is similar to input/output // file stream. We need to declare a stringstream // just like an fstream, for example: stringstream ss; // and, like an fstream or cout, // we can write to it: ss << myString; or ss << myCstring; or ss << myInt;, or float, or double, etc. // and we can read from it: ss >> myChar; or ss >> myCstring; or ss >> myInt;4 4. Sử dụng cho vòng lặp để chuyển đổi chuỗi thành sốC++The value of x : 1234563 The value of x : 1234564 int sscanf ( const char * s, const char * format, ...);2 The value of x : 1234566 The value of x : 12345.5400394 int sscanf ( const char * s, const char * format, ...);2 The value of x : 1234569 The value of x : 12345.5400394 The value of x : 1234571 The value of x : 1234572 The value of x : 1234573 The value of x : 1234574 The value of x : 1234575 The value of x : 123455 Bài viết này được đóng góp bởi Siffi Singh. Nếu bạn thích GeekSforGeeks và muốn đóng góp, bạn cũng có thể viết một bài viết trên write.geeksfeeks.org. Xem bài viết của bạn xuất hiện trên trang chính của GeekSforGeek và giúp các chuyên viên máy tính khác. Vui lòng viết nhận xét nếu bạn tìm thấy bất cứ điều gì không chính xác hoặc nếu bạn muốn chia sẻ thêm thông tin về chủ đề được thảo luận ở trên.Siffi Singh. If you like GeeksforGeeks and would like to contribute, you can also write an article on write.geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks. Please write comments if you find anything incorrect, or if you want to share more information about the topic discussed above. Làm thế nào để bạn chuyển đổi một chuỗi thành một số?Bạn chuyển đổi một chuỗi thành một số bằng cách gọi phương thức parse hoặc tryparse được tìm thấy trên các loại số (int, dài, gấp đôi, v.v.) hoặc bằng cách sử dụng các phương thức trong lớp System.convert.by calling the Parse or TryParse method found on numeric types ( int , long , double , and so on), or by using methods in the System.Convert class.
Chúng ta có thể sử dụng stoi trong c không?Stoi () trong C ++ là gì?Trong C ++, hàm stoi () chuyển đổi một chuỗi thành giá trị số nguyên.Hàm là tốc ký cho chuỗi chuỗi thành số nguyên, các lập trình viên và C ++ sử dụng nó để phân tích các số nguyên ra khỏi chuỗi.Hàm stoi () là tương đối mới, vì nó chỉ được thêm vào ngôn ngữ kể từ bản sửa đổi mới nhất (C ++ 11) vào năm 2011.In C++, the stoi() function converts a string to an integer value. The function is shorthand for “string to integer,” and C++ programmers use it to parse integers out of strings. The stoi() function is relatively new, as it was only added to the language as of its latest revision (C++11) in 2011.
Hàm nào chuyển đổi một chuỗi thành một số nguyên?Hàm atoi () chuyển đổi một chuỗi ký tự thành giá trị số nguyên.Chuỗi đầu vào là một chuỗi các ký tự có thể được hiểu là giá trị số của loại trả về được chỉ định.atoi() function converts a character string to an integer value. The input string is a sequence of characters that can be interpreted as a numeric value of the specified return type.
Làm cách nào để chuyển đổi một chuỗi thành int trong c #?Trong C#, bạn có thể chuyển đổi một biểu diễn chuỗi của một số thành một số nguyên bằng phương thức các cách sau: parse ().Chuyển đổi lớp.Phương thức tryparse () - được đề xuất ... Int16.Tryparse (). Int32.Tryparse (). Int64.Tryparse (). |